Weber 650, 450 Assembly Instructions, Wash All Components Before Assembly, Assembly of Meat Clamp

Assembly Instructions

1. Wash All Components Before Assembly	5. Assembly of Meat Clamp
	Insert both Thumb Screws into the holes on the Lock
2. Install the Motor Bracket	Arm. NOTE: Do not tighten Thumb Screws fully.

Attach the stainless steel Motor Bracket to the left side of

the Cooking Box, using the 1/4 x 20 x 5/8” fasteners and

the 1/4-20 Keps nuts.	Screw
	Holes
Lock	Thumb
Arm	Screw

3. Attach the Motor

Slide the Motor onto the stainless steel Motor Bracket.

4.Attach Rotisserie Shaft to the Rottisserie Basket

Screw Handle Shaft and Handle together.

Screw Rotisserie Shaft to Rotisserie Basket and tighten shaft with adjustable wrench. Screw Handle Shaft/Handle to Rotisserie Basket. NOTE: All threads are counter-clockwise, or tighten to the left.

Tighten

Shaft

Here

Rotisserie
Shaft
Rotisserie		Handle
Basket	Handle Shaft

Insert middle Meat Clamp Arm into top of the Lock Arm as shown. Tighten top Thumb Screw to lock Meat Clamp into shaft.

Repeat all of step 5 for remaining Meat Clamps.

Middle

Meat

Clamp

Arm

Top of

Lock Arm

6. Attach Meat Clamps to Rotisserie Basket

Face prongs of Meat Clamp toward the inside of the Rotisserie Basket. Slide bottom of Lock Arm onto tapered portion of the rail of Rotisserie Basket. Slide Lock Arm along rail to desired position. Tighten Thumb Screw at bottom of Lock Arm to fix its position on Rotisserie Basket.

Bottom of

Lock Arm

Tapered

Rail