Weber Genesis Silver B Gas Grill Install the accessory rack, Complete accessory installation

Step 21

Install the accessory rack

You will need: accessory rack.

Rest the left end of the accessory rack on the base panel. Figure 33 (a).

Insert the right hooks into the right side frame slots. Figure 33 (b).

Raise the left end up and slide left hooks into the left side frame slots. Figure 33.

Left side

frame slots

(a)

Right side

frame

(b)

Left hooks

Step 22

Complete accessory installation

You will need: Warm-Up Basket, warming rack, work surface, thermometer, right trim piece with tool holder, and a hammer.

Insert one end of the Weber Warm-Up Basket into the hole in the right end of the lid and the other end into the slot in the left end of the lid. Figure 34 (a).

Set the warming rack into the slots at the rear of the cooking box. Figure 34 (b).

Set the work surface onto the left side rails. Figure 34 (c). Make sure that the tabs on the side of the table are to the right, next to the cooking box.

Insert the thermometer into its holder. Figure 34 (d).

Push the right trim piece into the frame as shown 34 (e), making sure that the tabs on the underside of the trim piece are snapped into the slots in the frame 34 (f).

(a)

(b)

(d)

(c)

Figure 33

(f)(e)

Figure 34

27