Connection Chart, Connect GAS Supply | Weber S-440, S-640 instruction

26	GAS SUPPLY

CONNECT GAS SUPPLY

A 58 inch (1,473.2 mm) corrugated gas line is supplied with the grill. This line needs to pass through the gas inlet opening to the main gas supply.

1)Connect the corrugated gas line to the manifold located on the right hand side of grill under the control panel. Use the 1/2” ﬂ ared gasket (1) to ensure proper seal.

Note: 1/2” ﬂared gaskets are included in the Summit Built-In tank cabinet (#21280) or included with your grill.

The corrugated line passes through the “Island Structure” cavity to the regulator

connection inside the Summit Built-In tank cabinet (#21280) or the hose and regulator connection inside the tank enclosure. (Shown below)

2)Uncap one ﬂ are ﬁ tting from the 90º Connection located inside the Summit Built-In Tank Enclosure.

3)Use the 1/2 inch ﬂ ared gasket to ensure proper seal.

NOTE: Only use the 3/8 inch (12.7 mm) ﬂ ared gasket if you are installing the optional side burner.

4) Connect the corrugated gas line to the 90º Connection.

CONNECTION CHART

ATop View

BTypical tank cabinet or tank enclosure location

CSide View

DTop of Box

EBack of Box

iCorrugated Gas Line to Manifold

ii90° ﬁ tting

iiiUse Bushing for Gas Line Hole

iv1/2” (12.7 mm) Flared Gasket

vCap (Optional Side Burner)

	A
	B
	i	D
		ii
	iii
E	iv
		v
	C