Weber Built-In LP Gas Grill, S-640, S-440 manual Tolerances, General Construction Details

BUILT-IN CUTOUT DIMENSIONS 3

BUILT-IN STRUCTURE CUTOUT DIMENSIONS

ALL DIMENSIONS ARE TO FINISHED SURFACES.

WARNING: All countertop finished surfaces must be constructed of a noncombustible material.

3

BUILT-IN CUTOUT DIMENSIONS

	S-440	S-640	TOLERANCES
1	30 1/4˝ (768.35 mm)	38 1/4˝ (971.55 mm)	+ 1/4˝	- 1/4˝ (6.35mm)
2	34 3/8˝ (873.13 mm)	34 3/8˝ (873.13 mm)	+ 1/4˝	- 1/4˝ (6.35mm)
3	23˝ (584.2 mm)	23˝ (584.2 mm)	+ 1/4˝	- 1/4˝ (6.35mm)

2

1

GENERAL CONSTRUCTION DETAILS

Summit® Built-In unit and all other accessory units should be on site before construction begins.

All dimensions have a tolerance of plus or minus (+/-) 1/4 inch (6.35 mm).

The grill frame rests directly on the Island Structure top fi nished surface. Make sure this surface is level. Do not support the grill from the bottom.

If the supporting structure is going to have an electrical outlet for a
rotisserie, it should be on the left side of the structure.	1

Refer to Summit® Built-In Tank Drawer Installation Instructions for complete gas line locations.

6

a

3

1 d

5	2	4
3		c
8	b

2

b

1

1

7

DIMENSIONS

BUILT-IN CUTOUT DIMENSIONS

	S-440	S-640
1	24” minimum* (610 mm)	24” minimum* (610 mm)
2
	3 3/4” (95.25 mm)	3 3/4” (95.25 mm)
3
	6 1/4” (158.75 mm)	6 1/4” (158.75 mm)
4
	10 1/2” (266.7 mm) minimum	10 1/2” (266.7 mm) minimum
5
	23” (584.2 mm)	23” (584.2 mm)
6
	34 3/8” (873.13 mm)	34 3/8” (873.13 mm)
7	27” (685.8 mm) minimum distance from front edge of	27” (685.8 mm) minimum distance from front edge of
	the cutout for open lid clearance	the cutout for open lid clearance
8
	30 1/4” (768.35 mm) Built-In Frame	38 1/4” (971.55 mm) Built-In Frame

aNote: For a countertop treatment: Recommended 3/4” (19.1 mm) overhang. Notch front edge for frame to fully slide in.

bGas Inlet

cSide Burner Opening

dAccess for electric on left hand side

*Clearance from any surface or structure is at least 24” (609.6mm) from the back and sides of the grill or side burner.

WWW.WEBER.COM®