Weber 520 owner manual Contents

Page 5

Contents

 

WARNINGS

2

Warranty & Patents

3-4

General Instructions

6

Assembly

7-18

Operating Instructions

 

Lighting

19-20

Cooking

21

Storage and/or Nonuse

21

Cleaning

21

Troubleshooting & Maintenance

 

Annual Maintenance

22

General Maintenance

23-24

Troubleshooting

26

Parts Listing

29

b

a

g

a

c

d

e

f

FEATURES:

a)Convenient tables and racks.

b)Heavy gauge porcelain-on-steel lid seals in heat.

c)Rapid read thermometer for precision cooking.

d)Heavy gauge steel Flavorizer Bars distribute heat within the grill. Flavorizer Bars heat just the right amount of drippings for flavoring, letting excess fat drip past to help prevent flare-ups.

e)Separate burners for temperature control.

f)Crossover Ignition System with Gas Catcher Ignition Chamber.

g)Catch pan catches excess grease.

5

Image 5
Contents Skyline LP GAS Units only MDANGER MWARNINGSWarranty Patents and Trademarks Contents Gas supply testing For Installation in CanadaGeneral Instructions StorageStep AssemblyCheck package contents Check contents of hardware packs Assemble top frame Assemble wheel frameAdd front panel Continue frame assemblyInstall tubing plugs Add cooking box Install frame connector Install manifold bracketInstall gas supply General Specifications for PipingTest connections Typical natural gas supply installation. FigureGas line piping Check that all burner valves are off Install igniterMWARNING Do not ignite burners while leak checking Check for gas leaksMCAUTION Do not line bottom tray with aluminum foil Install Flavorizer Bars and Cooking GratesInstall the bottom tray Add tool holders, control panel and burner control knobs Install LidComplete accessory installation To Extinguish LightingManual Lighting Cooking Periodic CleaningStorage and/or Nonuse PreheatingInspection and Cleaning of the Weber Spider Stopper Guards Annual MaintenanceMain Burner Cleaning Procedure General MaintenanceMCAUTION Do not enlarge the burner ports when cleaning Weber Spider Stopper GuardsTo reinstall the burners, reverse steps c through g Crossover Ignition System Operations MCAUTION Do not line the bottom tray with aluminum foil Burner does not light, or flame is low in High positionPage 12-13 Parts List Page Page Final Word Thanks