Assembly Instructions

INSTR-Turkey Fryer/Sears 9/26/01 9:35 AM Page 4

READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR COOKER.

Inspect contents of the box to ensure all parts are included and undamaged.

FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-527-0717.

(Proof of purchase will be required.)

Tools required to assemble your cooker:

2 Adjustable wrenches

Adjustable wrench and the following wrenches:

•d" Open end wrench

•w" Open end wrench

•f" Open end wrench

PARTS LIST:

1 Owner’s Manual

1 Cooker Stand

1 Burner Assembly

1 Hose & Regulator with Safety Tag

1 Boiling Pot with Lid

1 Turkey Stand and Hanger

1 Deep Fry Thermometer

Type 1		Female
Type 1		SAE
Connector		SAE
Connector		Fitting
		Fitting
Air Hole		Rotating
		Rotating
		Air Shutter

NOTE: Make sure the male SAE fitting on the cooker is screwed into the air shutter and tightened securely. Do not over-tighten as the air shutter needs to move freely in order to adjust air intake. Check the attachment for proper connection every time propane tank is connected to cooker.

Turkey Fryer

Gas Cooker

Step 1

Remove nut from bottom of burner assembly.

Step 2

Position the stand upside down as shown.

Step 3

Place burner assembly

inside stand with threaded bolt protruding

through support strap as shown.

Step 4

Thread nut onto bolt and securely tighten. Do not overtighten.

Step 5

Set cooker with burner assembly upright on flat surface. Make sure burner assembly is securely attached to cooker.

Step 6

Attach female SAE fitting on hose assembly (using w" wrench) to the male SAE fitting on the burner (using d" wrench). Hold the male SAE fitting securely with one wrench and turn the female fitting with the other wrench until they are tightly joined.

PROCEED TO “GAS LEAK TESTING” SECTION ON PAGE 4.