Brinkmann Series 2630 owner manual Step

Page 19

Locking Caster

Hex Nut Wrench

Choose a good, cleared assembly area and get a friend to help you put your grill together. Lay cardboard down to protect grill finish and assembly area.

Step 1

Assemble bottom cart panel and right side cart panel assembly by using four M6 X 60mm bolts (hand tighten only at this point).

Step 2

Assemble bottom cart panel and left side cart panel assembly by using four M6 X 60mm bolts. Tighten all eight M6 X 60mm bolts at this time.

Note: With the help of a friend, turn the cart over, try to minimize the stress to the side panels.

Step 3

Attach locking casters to the bottom of the cart. Tighten caster bolts securely using hex nut wrench provided in parts pack.

Note: With the help of a friend, turn the cart to its upright position.

18

Image 19

Contents Stainless Steel Outdoor Grill For Your Safety Important SafetyPage Installation Information Disconnecting Your Grill from the Natural GAS Source Connecting Your Grill to the Natural GAS SourceWhen to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Main Burners Lighting InstructionsMatch Lighting the Main Burners Match Lighting the Side Burner Lighting the Side BurnerTurning OFF the Grill Controlling FLARE-UPS Operating the GrillBreaking in Your Grill Preheating the GrillSide Burner Rotisserie CookingHardware Cleaning and MaintenanceTransporting and Storage Before Storing Your GrillCooking Grills Burner ASSEMBLY/MAINTENANCEProblem Possible Causes Burner will not light Trouble ShootingGrilling to Proper Temperature CleanlinessHelpful Hints Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts Card Contents Step Attach back cart panel by using six M6 X 60mm bolts Hands and fingers Step Side Table Screw Holes Tool Drawer Step Pro Series 2630 Assembled Accessories Gallon PAN & Basket SET Warranty