LIGHTING THE SIDE BURNER:
1. Open lid to the side burner before lighting.
2. Turn on the side burner by pressing in and rotating the control knob to the HIGH position.
3. Press and hold the igniter button on the main control panel for
4. If burner does not ignite immediately, turn the burner control knob to OFF and wait 5 minutes for gas to evacuate the grill. Repeat steps 1 through 4 until burner ignites.
5.If burner does not ignite using the push button igniter wait 5 minutes, see "Match Lighting the Side Burner" section.
MATCH LIGHTING THE SIDE BURNER:
1.Open the lid to the side burner before lighting.
2.Turn the burner control knob to OFF.
3.Strike and place a match approximately 1/2" (2 to 3 cm) from the burner.
4.Turn the side burner control knob to the HIGH position. The burner should light immediately.
5.If burner does not ignite immediately, turn the burner control knob to OFF and wait 5 minutes for gas to evacuate the grill. Repeat steps 1 through 5 until the burner ignites.
6.If the burner does not light within the first few attempts of match lighting, there is a problem with the gas supply. Turn off the gas at the burner and natural gas supply. DO NOT attempt to operate the grill until the problem is found and corrected. See “Trouble Shooting” section of this manual.
NOTE: Observe flame height when lit: Flame should be a Blue/Yellow color approximately 1” high when burner is on “High.”
TURNING OFF THE GRILL:
1.Turn OFF the natural gas supply.
2.Turn all burner control knobs to the OFF position.
NOTE: Turn off the natural gas supply first to prevent gas from being left in the system under pressure.
1”
.5”
0”
CAUTION !
•The natural gas supply should always be in the off, or closed, position when the grill is not in use.
8