Brinkmann Series 2630 owner manual Step

Page 22

Step 9

Attach side burner assembly to grill body assembly by inserting four M6 X 20mm bolts through the holes in the side burner assembly and into holes of grill body assembly. Tighten all four bolts. Install side burner grate and control knob.

Side burner grate

Step 10

Remove the plastic cap on gas supply manifold and attach rubber gas hose to gas supply manifold. Hand tighten first, then use supplied wrench to turn brass nut an additional 1/8 turn.

Important: Do not overtighten. This could damage brass fitting.

Warning: Never use your grill without leak testing all gas connections and hoses. See the section on “Leak Testing” in this manual for proper procedures. (See page 5)

Step 11

Attach side burner igniter lead to the electrode as illustrated.

21

Screw Holes

Rubber	Side Burner	Electrode
Rubber	Igniter Lead
Gas Hose	Brass Nut

Image 22

Contents Stainless Steel Outdoor Grill Important Safety For Your SafetyPage Installation Information Connecting Your Grill to the Natural GAS Source Disconnecting Your Grill from the Natural GAS SourceWhen to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Main Burners Lighting InstructionsMatch Lighting the Main Burners Match Lighting the Side Burner Lighting the Side BurnerTurning OFF the Grill Preheating the Grill Operating the GrillBreaking in Your Grill Controlling FLARE-UPSRotisserie Cooking Side BurnerBefore Storing Your Grill Cleaning and MaintenanceTransporting and Storage HardwareBurner ASSEMBLY/MAINTENANCE Cooking GrillsTrouble Shooting Problem Possible Causes Burner will not lightGrilling to Proper Temperature CleanlinessHelpful Hints Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts Card Contents Step Attach back cart panel by using six M6 X 60mm bolts Hands and fingers Step Side Table Screw Holes Tool Drawer Step Pro Series 2630 Assembled Accessories Gallon PAN & Basket SET Warranty