Brinkmann Outdoor Charcoal/Wood Smoker & Grill Attach front shelf and side handle to smoker

Page 6

Step 6

Install smokestack inside smokestack pilot as illustrated. Tighten smokestack screw with 9⁄16" wrench.

Step 7

To install air vent damper, open the firebox door and attach damper to inside of firebox door as illustrated. Do not overtighten as this will make the air vent difficult to open and close.

NOTE: Make sure air vent damper handle faces outside of the firebox door.

Step 8

Attach the door latch to the outside of the firebox door as illustrated. Do not overtighten hex nut.

Step 9

Attach front shelf and side handle to smoker.

CAUTION: A metal bucket must be kept under grease hole at all times. Empty or replace bucket when w full to prevent spills during removal. Use caution when removing to avoid spilling hot grease.

Metal Bucket (not included)

Grease

Hole

Step 10

Remove nut from temperature gauge hole in smoker. Remove tightening ring from gauge. Screw probe into temperature gauge hole in smoker. DO NOT OVERTIGHTEN!

Temperature

Gauge

Temperature

Gauge Hole

Smokestack

Smokestack

Pilot

Smokestack

Screw

Butterfly

Damper

Front Shelf

Side

Handle

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Assembly & Operating Instructions Important Safeguards Properly dispose of all packaging material Assembly Instructions Parts Bag ContainsStep Attach front shelf and side handle to smoker If Using Charcoal Chimney STARTER, Proceed to Step Preparation for USE Lighting InstructionsYour Cimarron is NOW Cured Ready for USE Operating Instructions Chamber Placement of Charcoal Grate If Using Charcoal Chimney STARTER, Proceed to StepRegulating Heat Adding Charcoal/Wood in Firebox Step Adding Charcoal/Wood in Cooking Chamber StepAFTER-USE Safety Proper Care & MaintenanceAccessories Cimarron Cooking Grill Smoke’N Pit Horizontal Charcoal Grate
Top Page Image Contents