Tanita WB-300 instruction manual Wake-up Function

Page 9

Wake-up Function

This function can be used if the user wishes to measure the weight immediately after the first reading. The scale must be in off-mode and the user must already be on the scale.

1.Press any key except ‘Zero’ key to activate (wake up) the scale. DO NOT press ‘Zero’ key.

2.Stand still.

“---” will be displayed on the Weight LCD. The weight will be locked-in and displayed on the Weight LCD. ‘Hold’ sign will appear in the upper left corner of the Weight LCD.

3.Step off the scale.

The Weight LCD will display the weight for 10 seconds then the scale will automatically shut off. If the user remains on the platform, the Weight LCD will display the weight for 20 seconds then automatically shut off.

Note: DO NOT press any key while the scale is waking up and before the weight has been locked-in and displayed on the Weight LCD. If the user presses a key while the scale is waking up, the weight reading will not be locked; instead it will operate according to the key you selected.

9

Image 9
Contents Electronic Physician Scale Table of ContentsImportant Notes for Users Product Specifications1900 Components DescriptionKey Operation Weight LCD Right Side Clock LCD List of Components Assembly InstructionsLevel the Scale Before UseInsert the Batteries Remove the LCD CoverSetting to Zero Set up the ClockInstructions for Use Weighing ProcedureAuto-on Function Turn-on FunctionWake-up Function Measuring Height Procedure WB-300MH and DH Reading the height Measurement Or More Weight Capacity ‘E’ General TroubleshootingResetting the Scale CalibrationReplacing Batteries Tanita Corporation