Panasonic FX-301 manual Fiber attachments FX-AT

Page 36

FX-301

PRECAUTIONS FOR PROPER USE.

Fiber

Fiber attachments (FX-AT)

Product outline

•When the beam-emitting and beam-receiving fiber cables are inserted into the fiber sensor amplifier (FX-301/302/303/311series etc.), the enclosed fiber attachment (FX-AT2/AT3/AT4/AT5/AT6) facilitates insertion of the fiber cables and reduces the possibility of incorrect fiber cable insertion.

Cautions

•Take care that FX-AT2,FX-AT3,FX-AT4,FX-AT5 and FX-AT6 cannot be used with fiber sensor amplifiers having a pitch, between the beam-emitting and the beam-receiving fiber cables, other than 7 mm 0.276 in. In case of fiber sensor amplifiers having a pitch other than 7 mm 0.276 in, please use attachments FX-AT10 or FX-AT13. (accessory)

Component description

<FX-AT2>

Attachment for fixed-length fiber: orange

<FX-AT3>

Attachment for "2.2 mm "0.087 in fiber: clear orange

<FX-AT4>

Attachment for "1 mm "0.039 in fiber: black

<FX-AT5>

Attachment for "1.3 mm "0.051 in fiber: gray

Mounting

<FX-AT2>

1Mount the plug part of the fiber cables in FX-AT2, as shown

in the figure below. (The resin plug has a groove to hold it in place.)

2 Connect the fiber cables, in condition 1, to the fiber sensor amplifier.

<FX-AT3>

1 Confirm that the fiber lock button of FX-AT3is in unlock side.

2 Insert the fiber cables one by one, in condition 1.

3After inserting, press down the fiber lock button. The fiber cables are fixed

at the desired position. (In order to unlock the fiber cables, press the fiber

lock button towards unlock direction from the opposite side.)

4 Insert the fiber cables into the holes for "2.2 mm "0.087 in fiber cables of the fiber cutter (FX-CT2)

from the direction shown in the figure right.

5Cut both fiber cables simultaneously. (At this time, place the attachment without any gap against the fiber cutter. The fiber cables will be cut at a position approx. 10.5 mm 0.413 in from the tip of the fiber cable.)

6After cutting, connect the fiber cables to the fiber sensor amplifier immediately.

<FX-AT4, FX-AT5, FX-AT6>

1Mount the holders on the gland lightly.

Notes: 1) If both long holders and short holders are enclosed with the fiber, use the short holders.

2)In case of FX-AT6, match the colors of the holders and the gland. The black color is for "1.0 mm "0.039 in fiber cable and the gray color is for "1.3 mm "0.051 in fiber cable.

<FX-AT6>

Attachment for "1 mm / "1.3 mm "0.039 in / "0.051 in mixed fiber

( for "1 mm "0.039 in fiber: black, ) for "1.3 mm "0.051 in fiber: gray

<FX-AT10>

Attachment for "1 mm "0.039 in fiber: black

This is enclosed by FX-AT4.

<FX-AT13>

Attachment for "1.3 mm "0.051 in fiber: gray

This is enclosed by FX-AT5.

2Insert the fiber cables into the holders, in condition 1.

3 Tighten the holders to fix the fiber cables at the desired length. 4 Insert the fiber cables, in

condition 3, into the holes for

"1.0 mm "0.039 in or "1.3 mm "0.051 in fiber cables of the fiber cutter (FX-CT2) from direction shown in the figure right.

5 Cut both fiber cables simultaneously.

(At this time, insert the attachment to a position at which it stops. The fiber

cables will be cut at a position approx. 0.5 mm 0.020 in from the holder.)

6After cutting, insert the fiber cables to the fiber sensor amplifier immediately.

<FX-AT10, FX-AT13>

1 Thread the fiber cable through the gland and holder separately, and screw the gland into the holder clockwise.

2Insert the fiber cables one by one into the holes for "1.0 mm "0.039 in

or "1.3 mm "0.051 in fiber cable of the fiber cutter (FX-CT2) from the direction shown in the figure right. (At this time, insert the attachment to a position at which it stops. The fibers will be cut at a position approx. 0.5

mm0.020 in from the holder.)

0 8 / 2 0 0 5

103

 

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Enhanced worksite-friendly installability Stable long-term sensingSelectable response time Passed the UL 991 Environment TestEasy maintenance, as main and sub units are identical Even beginners can quickly learn how to use the Mode NaviUse of only two switches makes for very simple operations Environmentally friendly packagingEquipped with each type of timer Easy code input settingInvertible digital display Selectable cable length Sensor-PLC connection system SC Series Bank selection unit ApplicationsOrder Guide OptionsList of Fibers Standard fibers Thru-beam type one pair setFT-B8 FT-NB8FT-WA30 FT-WA8FT-WZ8H FT-WZ8ESpecial use fibers Thru-beam type one pair set Environment resistant fibers Thru-beam type one pair set Semi-standard fibers Custom made per orderStandard fibers Reflective type Shape of fiber head Sensing range mm in Note 1FD-B8 FD-5Sharp bending fibers / Flexible fibers Reflective type Special use fibers Reflective type FD-F8YFD-G6X Environment resistant fibers Reflective type FD-6VFD-FM  Fiber Options Lens For thru-beam type fiberLens For reflective type fiber Others Protective tubeFiber bender Universal sensor mounting standSpecifications Output Are connected in cascadeFibers Type Standard FlexibleType Sharp bending Type Special use Wide beam Array Narrow beam High precisionLiquid level sensing FD-F4/F9Environment resistant Type Chemical-resistantCircuit and Wiring Diagrams Circuit diagram Wiring diagram Terminal arrangement diagramCircuit diagram Wiring diagram NPN output typeSensing Characteristics Typical FT-B8FT-NB8 FT-N8FZ-WZ8E FT-WZ8FT-WKV8 FT-WS3FT-WV42 FT-Z8HFT-Z8E FT-Z8FT-E12 FT-E22FT-P81X FT-L8YFT-60V FT-W8FT-H20W-M2 FT-H20-M1FT-H35-M2 FD-N8 FD-N4FD-WKZ1 FD-P2 FD-G4FD-G6 FD-EG1FD-EG3 FD-G6XPrecautions for Proper USE AmplifierTeaching Case of 2-level teachingStep Description Case of full auto-teaching FX-301BP/GP/HP onlyThreshold value fine adjustment Output operation settingTimer operation setting WiringPRO mode Table for PRO mode settingsFiber If using the attached mounting brackets Mounting FT-Z8and FT-WZ8FT-Z8 / FT-WZ8 Front sensing type FT-Z8H / FT-WZ8H Top sensing typeHow to bend sleeve Connection with reflective coaxial type fiberMethod of fixing fiber cable Fiber cable bending radiusFiber attachments FX-AT Fiber cutter FX-CT2 Vacuum type fiberSeal type slit mask for FT-WA30/A30,FT-WA8/A8 FT-L8Y/V8Y chemical-resistant type fiber FD-F8Y liquid level sensing fiberAdjustment FD-F4and FD-F9liquid level sensing fiberFitting protective tube FittingSleeve part Tightening torque 58 N m or lessDimensions Unit mm MS-DIN-2Main cable Optional Sub cable OptionalThru-beam type fibers Free-cutFT-SFM2SV2 FT-WS8L FT-P2 FT-H35-M2S6 FT-6VFD-FM2 FD-NFM2FD-SFM2SV2 FD-AFM2 FD-EN500S1 FD-ENM1S1FD-L43 FD-L4 FD-H35-M2 FD-H20-M1 FD-H30-L32FD-H13-FM2 Free-cut With FX-AT3 FD-6VFX-LE2 FV-LE1FT-J6 FX-SV1FX-CT2 FX-AT3FX-AT5 FX-AT2Individual teaching mode Teach Collective teaching mode ALLFlashing function incorporated Easy operation with Mode Navi Two switches with distinct functionsAmplifier mounting Bracket Protection sealFiber sensor amplifier MS-DIN-2 FX-MB1521 Dismantling method Setting items RUN Mode Individual teaching modeHow to change to ‘percent display’ How to check the sensitivity stateCollective teaching mode Threshold value fine adjustment modeDigital display setting mode Forced output mode Timer function Liquid F9 mode onlySensitivity selection function Step Description DisplayNo / NC selection function Liquid F9 mode only Error indication‘Individual teaching Mode ’ or ‘Collective teaching mode ’ When an error is displayed, remedy as follows527 Industry’s largest display Industry first! Light-emitting amount selection functionFX-305 FX-305PAll information is subject to change without prior notice FX-305 FX-305P

FX-301 specifications

The Panasonic FX-301 is a compact digital camera that merges portability with advanced photographic features, making it an ideal choice for photography enthusiasts and everyday users alike. Launched within Panasonic's well-regarded Lumix line, the FX-301 is designed to deliver remarkable image quality while enhancing ease of use.

One of the standout features of the Panasonic FX-301 is its impressive 12.1-megapixel sensor, which enables users to capture high-resolution images with exceptional detail. This powerful sensor works alongside the camera's versatile 28mm wide-angle Leica lens, offering a 4x optical zoom. The lens not only enhances the camera's capability in capturing wide landscapes but also excels in various lighting conditions, allowing for both outdoor and indoor photography.

In addition to its robust photographic capabilities, the FX-301 incorporates several advanced technologies to optimize image quality. The Intelligent Auto Mode (iA) is a user-friendly feature that automatically adjusts settings based on the shooting environment, helping users achieve better results without the need for deep technical knowledge. Furthermore, the camera includes Optical Image Stabilization (OIS), which helps to minimize blur caused by hand movements, ensuring clearer images even in challenging situations.

The Panasonic FX-301 also boasts a range of creative shooting modes that cater to diverse photographic needs. From macro photography for close-up shots to night scene mode for capturing the beauty of nighttime scenes, the camera provides various options to enhance creative expression. This adaptability is further supported by its 2.7-inch LCD display, which facilitates easy framing and reviewing of shots, even in bright sunlight.

Battery life is another noteworthy aspect of the FX-301, allowing users to capture numerous shots on a single charge. This durability makes it an ideal companion for travel and daily use, ensuring that spontaneous moments can be captured without the worry of running out of power.

In summary, the Panasonic FX-301 is a compact digital camera that offers impressive image quality, a user-friendly interface, and a suite of features designed to elevate the photography experience. With its blend of advanced technologies, optical performance, and intuitive controls, it stands as a strong contender in the realm of portable digital cameras. This camera caters to both novice photographers and professionals seeking a reliable, high-quality shooting experience.
Top Page Image Contents