Panasonic FX-301 manual Precautions for Proper USE, Dismantling method

Page 59

FX-301-F

PRECAUTIONS FOR PROPER USE

This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor.

Mounting

How to mount the amplifier

1Fit the rear part of the mounting

section of the amplifier on a 35 mm 1.378 in width DIN rail.

2 Press down the front part of the mounting section of the amplifier on the 35 mm 1.378 in width DIN rail.

How to remove the amplifier

1Push the amplifier forward.

2Lift up the front part of the amplifier

to remove it.

Note: Take care that if the front part is lifted up without pushing the amplifier forward, the hook on the rear portion of the mounting section is likely to break.

How to connect the fiber cables

Make sure to fit the fiber attachment (FX-AT4), enclosed with the fiber, to the fibers.

Please refer to the instruction manual of the fiber attachment for the fitting method.

1 Snap the fiber lock lever down.

2 Insert the fiber cables slowly into the inlets until they stop. (Note)

3Return the fiber lock lever to the

original position, till it stops.

Note: In case the fiber cables are not inserted to a position where they stop, the sensing becomes unstable.

Connection

Make sure that the power supply is off while connecting or disconnecting the quick-connection cable.

Connection method

1 Holding the connector of the quick- connection cable, align its projec- tion with the groove at the top portion of the amplifier connector.

2 Insert the connector till a click is felt.

Disconnection method

1Pressing the projection at the top of

the quick-connection cable connec- tor, pull out the connector.

Note: Take care that if the connector is pulled out without pressing the projection, the projection may break. Do not use a quick-connection cable whose projection has broken.

Further, do not pull by holding the cable, as this can cause a cable- break.

Cascading amplifiers

Make sure that the power supply is off while cascading or removing the amplifiers.

Make sure to check the allowable ambient temperature, as it depends on the number of amplifiers connected in cascade.

In case two, or more, amplifiers are connected in cascade, make sure to mount them on a DIN rail.

When connecting in cascade, mount the amplifiers close to each other, fitting them between the optional end plates (MS-DIN-E) mounted at the two ends.

When the amplifiers move on the DIN rail depending on the attaching condition, fitting them between the optional end plates (MS-DIN-E) mounted at the two ends.

Up to maximum 15 amplifiers can be added (total 16 amplifiers connected in cascade.)

When connecting more than two amplifiers in cascade, use the sub cable (CN-71-C) as the quick-connection cable for the second amplifier onwards.

Since the model setting gets changed if collective teaching is done for the amplifiers in Leak setting (F7 mode) and in Liquid setting (F9 mode) mounted in cascade, note that collective teaching should not be done for amplifiers with different model settings mounted in cascade.

Since the communication function of this amplifier and that of the fiber sensor FX-301/311series is different, if these models are mounted in cascade, do not use the communication function.

In case of cascading, wait for 10 minutes, or more, to use the teaching function after the power is switched on.

Cascading method

1 Mount the amplifiers, one by one, on the 35 mm 1.378 in width DIN rail.

(For details, refer to ‘Mounting’.)

2Slide the sub units next to each

other, and connect the quick- connection cables.

3 Mount the optional end plates (MS-DIN-E) at both the ends to hold the amplifiers between their flat sides.

4 Tighten the screws to fix the end plates (MS-DIN-E).

Dismantling method

1 Loosen the screws of the end plates (MS-DIN-E).

2 Remove the end plates (MS-DIN-E).

3 Slide the sub units and remove them one by one.

(For details, refer to ‘Mounting’.)

522

08/2005

 

Image 59
Contents Passed the UL 991 Environment Test Enhanced worksite-friendly installabilityStable long-term sensing Selectable response timeEnvironmentally friendly packaging Easy maintenance, as main and sub units are identicalEven beginners can quickly learn how to use the Mode Navi Use of only two switches makes for very simple operationsInvertible digital display Selectable cable length Equipped with each type of timerEasy code input setting Applications Sensor-PLC connection system SC Series Bank selection unitOptions Order GuideFT-NB8 List of FibersStandard fibers Thru-beam type one pair set FT-B8FT-WZ8E FT-WA30FT-WA8 FT-WZ8HSpecial use fibers Thru-beam type one pair set Semi-standard fibers Custom made per order Environment resistant fibers Thru-beam type one pair setFD-5 Standard fibers Reflective typeShape of fiber head Sensing range mm in Note 1 FD-B8Sharp bending fibers / Flexible fibers Reflective type FD-G6X Special use fibers Reflective typeFD-F8Y FD-FM  Environment resistant fibers Reflective typeFD-6V Lens For reflective type fiber Fiber OptionsLens For thru-beam type fiber Universal sensor mounting stand OthersProtective tube Fiber benderOutput Are connected in cascade SpecificationsType Special use Wide beam Array Narrow beam High precision FibersType Standard Flexible Type Sharp bendingChemical-resistant Liquid level sensingFD-F4/F9 Environment resistant TypeNPN output type Circuit and Wiring DiagramsCircuit diagram Wiring diagram Terminal arrangement diagram Circuit diagram Wiring diagramFT-N8 Sensing Characteristics TypicalFT-B8 FT-NB8FT-WS3 FZ-WZ8EFT-WZ8 FT-WKV8FT-Z8 FT-WV42FT-Z8H FT-Z8EFT-L8Y FT-E12FT-E22 FT-P81XFT-H20-M1 FT-60VFT-W8 FT-H20W-M2FT-H35-M2 FD-WKZ1 FD-N8FD-N4 FD-EG1 FD-P2FD-G4 FD-G6FD-G6X FD-EG3Amplifier Precautions for Proper USECase of full auto-teaching FX-301BP/GP/HP only TeachingCase of 2-level teaching Step DescriptionWiring Threshold value fine adjustmentOutput operation setting Timer operation settingTable for PRO mode settings PRO modeFiber FT-Z8H / FT-WZ8H Top sensing type If using the attached mounting bracketsMounting FT-Z8and FT-WZ8 FT-Z8 / FT-WZ8 Front sensing typeFiber cable bending radius How to bend sleeveConnection with reflective coaxial type fiber Method of fixing fiber cableFiber attachments FX-AT Seal type slit mask for FT-WA30/A30,FT-WA8/A8 Fiber cutter FX-CT2Vacuum type fiber FD-F8Y liquid level sensing fiber FT-L8Y/V8Y chemical-resistant type fiberFD-F4and FD-F9liquid level sensing fiber AdjustmentTightening torque 58 N m or less Fitting protective tubeFitting Sleeve partSub cable Optional Dimensions Unit mmMS-DIN-2 Main cable OptionalFree-cut Thru-beam type fibersFT-SFM2SV2 FT-WS8L FT-P2 FT-6V FT-H35-M2S6FD-NFM2 FD-FM2FD-SFM2SV2 FD-AFM2 FD-L43 FD-EN500S1FD-ENM1S1 FD-L4 FD-6V FD-H35-M2FD-H20-M1 FD-H30-L32 FD-H13-FM2 Free-cut With FX-AT3FX-SV1 FX-LE2FV-LE1 FT-J6FX-AT2 FX-CT2FX-AT3 FX-AT5Flashing function incorporated Individual teaching mode TeachCollective teaching mode ALL Two switches with distinct functions Easy operation with Mode NaviMS-DIN-2 FX-MB1 Amplifier mountingBracket Protection seal Fiber sensor amplifier521 Dismantling method How to check the sensitivity state Setting items RUN ModeIndividual teaching mode How to change to ‘percent display’Digital display setting mode Collective teaching modeThreshold value fine adjustment mode Step Description Display Forced output modeTimer function Liquid F9 mode only Sensitivity selection functionWhen an error is displayed, remedy as follows No / NC selection function Liquid F9 mode onlyError indication ‘Individual teaching Mode ’ or ‘Collective teaching mode ’527 Industry first! Light-emitting amount selection function Industry’s largest displayFX-305 FX-305P FX-305FX-305P All information is subject to change without prior notice

FX-301 specifications

The Panasonic FX-301 is a compact digital camera that merges portability with advanced photographic features, making it an ideal choice for photography enthusiasts and everyday users alike. Launched within Panasonic's well-regarded Lumix line, the FX-301 is designed to deliver remarkable image quality while enhancing ease of use.

One of the standout features of the Panasonic FX-301 is its impressive 12.1-megapixel sensor, which enables users to capture high-resolution images with exceptional detail. This powerful sensor works alongside the camera's versatile 28mm wide-angle Leica lens, offering a 4x optical zoom. The lens not only enhances the camera's capability in capturing wide landscapes but also excels in various lighting conditions, allowing for both outdoor and indoor photography.

In addition to its robust photographic capabilities, the FX-301 incorporates several advanced technologies to optimize image quality. The Intelligent Auto Mode (iA) is a user-friendly feature that automatically adjusts settings based on the shooting environment, helping users achieve better results without the need for deep technical knowledge. Furthermore, the camera includes Optical Image Stabilization (OIS), which helps to minimize blur caused by hand movements, ensuring clearer images even in challenging situations.

The Panasonic FX-301 also boasts a range of creative shooting modes that cater to diverse photographic needs. From macro photography for close-up shots to night scene mode for capturing the beauty of nighttime scenes, the camera provides various options to enhance creative expression. This adaptability is further supported by its 2.7-inch LCD display, which facilitates easy framing and reviewing of shots, even in bright sunlight.

Battery life is another noteworthy aspect of the FX-301, allowing users to capture numerous shots on a single charge. This durability makes it an ideal companion for travel and daily use, ensuring that spontaneous moments can be captured without the worry of running out of power.

In summary, the Panasonic FX-301 is a compact digital camera that offers impressive image quality, a user-friendly interface, and a suite of features designed to elevate the photography experience. With its blend of advanced technologies, optical performance, and intuitive controls, it stands as a strong contender in the realm of portable digital cameras. This camera caters to both novice photographers and professionals seeking a reliable, high-quality shooting experience.