Panasonic FX-301 manual FX-305P, All information is subject to change without prior notice

FX-305

SPECIFICATIONS I/O CIRCUIT

	Type	NPN output	PNP output
Item	Model No.	FX-305	FX-305P

Sensing range	Thru-beam type (FT-B8): 1,700 (U-LG), 1,100 (LONG), 730 (STDF)
	530 (STD), 400 (FAST), 200 (H-SP)

(mm)Reflective type (FD-B8): 600 (U-LG), 480 (LONG), 280 (STDF) 220 (STD), 160 (FAST), 85 (H-SP)

Supply voltage	12 to 24 V DC10 %	Ripple P-P 10 % or less
Power consumption	Normal operation: 960 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
	ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
	NPN open-collector transistor		PNP open-collector transistor
	• Maximum sink current: each 50 mA (Note1)		• Maximum source current: each 50 mA (Note1)
Output	• Applied voltage: 30 V DC or less		• Applied voltage: 30 V DC or less
(Output 1, Output 2)	(between output and 0 V)		(between output and V)
	• Residual voltage: 1.5 V or less		• Residual voltage: 1.5 V or less
	[at each 50 mA (Note 1) sink current]		[at each 50 mA (Note 1) source current]
Output operation	Selectable either Light-ON or Dark-ON, with jog switch
Short-circuit protection	Incorporated
Response time	H-SP: 65 !s or less, FAST 150 !s or less, STD: 250 !s or less, STDF: 700 !s or less,
(Note 2)	LONG: 2.5 ms or less, U-LG: 4.5 ms or less selectable with jog switch
Digital display	4-digit red LED display
	Normal mode: 2-level teaching / Limit teaching / Full-auto teaching /
Sensitivity setting	Max. sensitivity teaching / Manual adjustment
	Window comparator mode: Teaching (1-level / 2-level / 3-level) /
	Manual adjustment
Fine sensitivity adjustment function	Incorporated
	Incorporated with variable ON-delay / OFF-delay / ONE-SHOT / ON-delayOFF-
Timer function	delay / ON-delayONE-SHOT timer, switchable either effective or ineffective
	(Timer period Output 1: 0.5 ms, 1 to 9999 ms, Output 2: 0.5 ms, 1 to 500 ms)
Automatic interference prevention	Incorporated [Up to 4 sets of fiber heads can be mounted close together
function (Note 2) (Note 3)	(However, U-LG mode is 8 sets, H-SP mode is 2 sets.)]
	10 to 55 °C 14 to 131 °F
	If 4 to 7 units are connected in cascade: 10 to 50 °C 14 to 122 °F,
Ambient temperatu-	(if 8 to 16 units are connected in cascade: 10 to 45 °C 14 to 113 °F )
re	(No dew condensation or icing allowed),
	Storage: 20 to 70 °C 4 to 158 °F
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Emitting element	Red LED (modulated)
Material	Enclosure: Heat-resistant ABS, Transparent cover: Polycarbonate
	Press switches: Acrylic, Jog switch: Heat-resistant ABS
Connecting method	Connector (Note 4)
Cable extension	Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight	20 g approx.

Notes: 1) 50 mA per output. 25 mA if five, or more, amplifiers are connected in cascade.

2)When the interference prevention function ‘’ is set, the number of mountable fibers becomes double. Furthermore, take care that the response time also becomes double.

3)When the power supply is switched on, the light emission timing is automatically set for interference prevention.

4)The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cables given below.

Main cable (4-core): CN-74-C1(cable length 1 m 3.281 ft), CN-74-C2(cable length 2 m 6.562 ft) CN-74-C5(cable length 5 m 16.404 ft)

Sub cable (2-core): CN-72-C1(cable length 1 m 3.281 ft), CN-72-C2(cable length 2 m 6.562 ft)

CN-72-C5(cable length 5 m 16.404 ft) CN-73-C□and CN-71-C□cannot be used.

PRECAUTIONS FOR PROPER USE

This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor.

All information is subject to change without prior notice.

FX-305 NPN output type

		Terminal No.			Color code of quick-connection cable
		D	1	(Brown) V (Note 1)
circuit	Tr1			(Black) Output 1			Load		12 to 24 V DC
			3			Load
Sensor	Tr2	ZD1	ZD22	(White) Output 2 50 mA max. (Note 2)					10 %
			4
					50 mA max. (Note 2)
				(Blue) 0 V (Note 1)
	Internal circuit				Users’ circuit

Notes: 1) The quick-connection sub cable does not have V (brown) and 0 V (blue). The power is supplied from the connector of the main cable.

2) 25 mA max., if five amplifiers, or more, are connected together.

Symbols … D: Reverse supply polarity protection diode

ZD1, ZD2: Surge absorption zener diode

Tr1, Tr2: NPN output transistor

FX-305P PNP output type

		Terminal No.		Color code of quick-connection cable
circuit		1 (Brown) V (Note 1)					12 to 24 V DC
		3
		ZD1			50 mA max. (Note 2)
Sensor	Tr1	ZD2	(Black) Output 1		50 mA max. (Note 2)
		4	(White) Output 2			Load  10 %
		Tr2				Load
		2	(Blue) 0 V (Note 1)
		D
		Internal circuit		Users’ circuit

Notes: 1) The quick-connection sub cable does not have V (brown) and 0 V (blue). The power is supplied from the connector of the main cable.

2) 25 mA max., if five amplifiers, or more, are connected together.

Symbols … D: Reverse supply polarity protection diode

ZD1, ZD2: Surge absorption zener diode

Tr1, Tr2: PNP output transistor

DIMENSIONS (Unit: mm in)

FX-305	Amplifier
FX-305P		12
	48.2 1.898
	26.3 1.035	0.472
		0.7
8.3	2.5
0.327	0.098	0.028
Output 1 operation indicator

(Orange)

MODE key

Output 2 operation indicator

(Orange)				Digital display (Red)		Jog switch
	10	3		64.5 2.539		3.3 0.13
		0.118
	0.394				27.8 1.094
			Communication
						7 0.276
Beam-			window
emitting
part
		30	3
Beam-		1.181				10.5 0.413
		7 0.276	0.118
receiving		7 0.276				3.95
part
						0.156
			13.5	36.5		Suitable for 35 mm 1.378 in
			0.531	1.437

width DIN rail

08/2005 123