Teledyne 3000TA quick start Set The Range Function, Fixed Range or Autoranging Analysis

Page 18

Quickstart Guide

Trace Oxygen Analyzer

 

 

•Latching? Ltch–Y/N(Yes/No).

•To change any of the alarm parameters, use the ◄► arrow keys to move the blinking over to the specific parameter.

•Use the ▲▼ arrow keys to change the value of the parameter. Holding down the key speeds up the incrementing or decrementing.

•Once the parameters for alarm 1 have been set, press Alarms again, and repeat this procedure for alarm 2 (AL–2).

•To reset a latched alarm, go to Dft– and then press either ▲ two times or ▼ two times. (Toggle it to Y and then back to N.)

—or—

Go to Ltch– and then press either ▲ two times or ▼ two times. (Toggle it to N and back to Y.)

Set The Range Function

To set the 3 programmable ranges:

•Enter the range function mode by pressing the Range button on the front panel.

L—100 M—1000

H—10000 Mode—AUTO

•Use the ◄► arrow keys to blink the range to be set: low (L), medium (M), or high

(H).

•Use the ▲▼ arrow keys to enter the upper value of the range (all ranges begin at 0 ppm). Repeat for each range you want to set.

•Press Enter to accept the values and return to analyze mode.

Note: The ranges must be increasing from low to high, for example, if range 1 is set as 0–100 ppm and range 2 is set as 0–1,000 ppm, range 3 cannot be set as 0– 500 ppm since it is lower than range 2.

Fixed Range or Autoranging Analysis

To switch from autoranging to fixed range analysis:

•Enter the range function by pressing the Range button.

•Use the ◄► arrow keys to move the blinking over AUTO.

Teledyne Analytical Instruments

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model 3000TA Page Front Panel Operator Interface Function KeysData Entry Keys Rear Panel Equipment Interface Model 3000TA Quickstart Guide Mount the Analyzer Gas ConnectionsElectrical Connections Connect Analog Outputs Connect Alarm Relays Connect primary input powerInstall the fuse Connect Digital Remote Cal InputsConnect Range ID Contacts Install the Micro-fuel CellConnect the 9-pin D connector to the RS-232 serial port Network I/OQuickstart Guide Trace Oxygen Analyzer Default Configuration Using the Data Entry and Function ButtonsAuto Ranging on Available Functions Password Protection Entering the PasswordCalibration of the Analyzer Zero CalibrationAuto Mode Zero Calibration Manual Mode ZeroingAuto Mode Spanning Manual Mode SpanningSpan Calibration Setting Alarm Parameters Set The Range Function Fixed Range or Autoranging AnalysisAnalyze Function
Related manuals
Manual 89 pages 24.58 Kb

3000TA specifications

The Teledyne 3000TA is an advanced telemetry system designed for high-performance applications in various industries such as aerospace, automotive, and research. This innovative device combines cutting-edge technologies with user-friendly features, making it an essential tool for engineers and scientists alike.

One of the standout features of the Teledyne 3000TA is its robust data acquisition capabilities. It offers a high sampling rate, which allows users to capture rapid changes in measurements accurately. This is particularly beneficial for applications that require real-time data analysis and decision-making, such as testing the performance of new aircraft components or monitoring engine behavior under different loads.

The 3000TA integrates multiple sensor interfaces, enabling it to connect seamlessly with various types of sensors, including temperature, pressure, and strain gauges. This versatility makes it suitable for a wide range of testing scenarios, from structural analysis to environmental monitoring. Users can customize the system to fit their specific needs, significantly enhancing its functionality.

Another significant advantage of the Teledyne 3000TA is its advanced wireless communication technology. By employing protocols like Bluetooth and Wi-Fi, it allows for remote data monitoring and access, which improves safety and convenience during testing processes. Engineers can easily gather data from hazardous environments without being physically present, ensuring both efficiency and safety.

The device is also equipped with an intuitive user interface, which simplifies the setup and operation processes. The touchscreen display provides real-time data visualizations and easy navigation through various menus, making it accessible even to those new to telemetry systems. This user-centric design reduces the learning curve and enhances overall productivity.

In terms of data integrity, the Teledyne 3000TA features robust error-checking and validation protocols. These built-in safeguards ensure that the data collected is accurate and reliable, which is crucial for making informed decisions based on telemetry data.

The system's compact and lightweight design ensures portability, allowing for use in various fields and environments. This flexibility enhances its appeal for field applications, where space and weight can be significant constraints.

In summary, the Teledyne 3000TA stands out as a versatile and reliable telemetry solution, combining high-performance data acquisition, advanced communication technologies, and user-friendly features. Its application across multiple industries makes it an invaluable tool for professionals seeking to optimize their testing and analysis processes.
Top Page Image Contents