Teledyne 3000TA quick start Install the Micro-fuel Cell, Connect Range ID Contacts, Network I/O

Page 9

Model 3000TA

Quickstart Guide

 

 

Connect Range ID Contacts:

There are four dedicated Range ID relay contacts on the rear panel. The first three ranges are assigned to relays in ascending order.

Range 1 ID— Low range Range 2 ID— Medium range Range 3 ID— High range

Range 4 ID—Air Cal Range (25%).

Network I/O:

A serial digital input/output for local network protocol. At this printing, this port is not yet functional. It is to be used in future options to the instrument.

Connect the 9-pin D connector to the RS-232 serial port.

See Section 3.3.2 in the Instruction Manual for information on setting up serial communication for this instrument.

Install the Micro-fuel Cell

The Model 3000TA is designed to accept the L2C Micro-fuel Cell or as an option, it can use the B2 series of Micro-fuel Cells by incorporating a spacer adaptor (Teledyne P/N B66378).

L2C Micro-fuel Cell

1.Remove power from the instrument.

2.Remove the old sensor (if installed). Discard in accordance with all Federal, State, Local or other regulations which may apply.

3.Purge the analyzer at approximately 1 SCFH flow rate with nitrogen (or applicable sample gas with the sensor holder removed).

4.Remove the new sensor from its double bag storage.

5.Remove the sensor shorting button.

6.Place the sensor inside the cell block.

7.Place the sensor on the sensor holder so that the gold contact plate of the sensor is facing upwards.

8.Install the sensor and sensor holder into the cell block.

Teledyne Analytical Instruments

9

Image 9
Contents Model 3000TA Page Front Panel Operator Interface Function KeysData Entry Keys Rear Panel Equipment Interface Model 3000TA Quickstart Guide Gas Connections Mount the AnalyzerElectrical Connections Install the fuse Connect primary input powerConnect Analog Outputs Connect Alarm Relays Connect Digital Remote Cal InputsConnect the 9-pin D connector to the RS-232 serial port Install the Micro-fuel CellConnect Range ID Contacts Network I/OQuickstart Guide Trace Oxygen Analyzer Default Configuration Using the Data Entry and Function ButtonsAuto Ranging on Available Functions Entering the Password Password ProtectionZero Calibration Calibration of the AnalyzerManual Mode Zeroing Auto Mode Zero CalibrationAuto Mode Spanning Manual Mode SpanningSpan Calibration Setting Alarm Parameters Fixed Range or Autoranging Analysis Set The Range FunctionAnalyze Function
Related manuals
Manual 89 pages 24.58 Kb

3000TA specifications

The Teledyne 3000TA is an advanced telemetry system designed for high-performance applications in various industries such as aerospace, automotive, and research. This innovative device combines cutting-edge technologies with user-friendly features, making it an essential tool for engineers and scientists alike.

One of the standout features of the Teledyne 3000TA is its robust data acquisition capabilities. It offers a high sampling rate, which allows users to capture rapid changes in measurements accurately. This is particularly beneficial for applications that require real-time data analysis and decision-making, such as testing the performance of new aircraft components or monitoring engine behavior under different loads.

The 3000TA integrates multiple sensor interfaces, enabling it to connect seamlessly with various types of sensors, including temperature, pressure, and strain gauges. This versatility makes it suitable for a wide range of testing scenarios, from structural analysis to environmental monitoring. Users can customize the system to fit their specific needs, significantly enhancing its functionality.

Another significant advantage of the Teledyne 3000TA is its advanced wireless communication technology. By employing protocols like Bluetooth and Wi-Fi, it allows for remote data monitoring and access, which improves safety and convenience during testing processes. Engineers can easily gather data from hazardous environments without being physically present, ensuring both efficiency and safety.

The device is also equipped with an intuitive user interface, which simplifies the setup and operation processes. The touchscreen display provides real-time data visualizations and easy navigation through various menus, making it accessible even to those new to telemetry systems. This user-centric design reduces the learning curve and enhances overall productivity.

In terms of data integrity, the Teledyne 3000TA features robust error-checking and validation protocols. These built-in safeguards ensure that the data collected is accurate and reliable, which is crucial for making informed decisions based on telemetry data.

The system's compact and lightweight design ensures portability, allowing for use in various fields and environments. This flexibility enhances its appeal for field applications, where space and weight can be significant constraints.

In summary, the Teledyne 3000TA stands out as a versatile and reliable telemetry solution, combining high-performance data acquisition, advanced communication technologies, and user-friendly features. Its application across multiple industries makes it an invaluable tool for professionals seeking to optimize their testing and analysis processes.