Teledyne 3000TA quick start Rear Panel Equipment Interface

Page 4

Quickstart Guide

Trace Oxygen Analyzer

 

 

•Left & Right Arrows Select between functions currently displayed on the VFD screen.

•Up & Down Arrows Increment or decrement values of functions currently displayed.

•Enter Advances VFD display to the next screen in a series or returns to the Analyze screen if none remain.

•Escape Backs VFD display to the previous screen in a series or returns to the Analyze screen if none remain.

Digital Meter Display:

The meter display is a Light Emitting Diode (LED) device that produces large, bright, 7-segment numbers that are legible in any lighting. It produces a continuous readout from 0-10,000 ppm and then switches to a continuous percent readout from 1-25%.

Alphanumeric Interface Screen

The VFD screen displays values, options, and messages for immediate feedback.

Set Flow:

Needle valve used to adjust flow of gas sample

Flowmeter:

Monitors the flow of gas past the sensor. Readout is 0.2 to 2.4 SLPM of nitrogen.

Standby Button:

The Standby turns off the display and outputs, but circuitry is still operating.

Access Door:

For access to the Micro-fuel Cell,the front panel swings open when the latch in the upper right corner of the panel is pressed all the way in.

Rear Panel (Equipment Interface)

At the rear panel you make the gas and electrical connections to the instrument.

•Power Connection: Universal AC power source.

•Gas Inlet and Outlet: Inlet, exhaust, zero and span.

•Remote Probe Connection: Used for

controlling external solenoid valves only.

•RS-232 Port: Serial digital concentration signal output and control input.

Teledyne Analytical Instruments

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Model 3000TA Page Function Keys Front Panel Operator InterfaceData Entry Keys Rear Panel Equipment Interface Model 3000TA Quickstart Guide Mount the Analyzer Gas ConnectionsElectrical Connections Connect primary input power Install the fuseConnect Analog Outputs Connect Alarm Relays Connect Digital Remote Cal InputsInstall the Micro-fuel Cell Connect the 9-pin D connector to the RS-232 serial portConnect Range ID Contacts Network I/OQuickstart Guide Trace Oxygen Analyzer Using the Data Entry and Function Buttons Default ConfigurationAuto Ranging on Available Functions Password Protection Entering the PasswordCalibration of the Analyzer Zero CalibrationAuto Mode Zero Calibration Manual Mode ZeroingManual Mode Spanning Auto Mode SpanningSpan Calibration Setting Alarm Parameters Set The Range Function Fixed Range or Autoranging AnalysisAnalyze Function
Related manuals
Manual 89 pages 24.58 Kb

3000TA specifications

The Teledyne 3000TA is an advanced telemetry system designed for high-performance applications in various industries such as aerospace, automotive, and research. This innovative device combines cutting-edge technologies with user-friendly features, making it an essential tool for engineers and scientists alike.

One of the standout features of the Teledyne 3000TA is its robust data acquisition capabilities. It offers a high sampling rate, which allows users to capture rapid changes in measurements accurately. This is particularly beneficial for applications that require real-time data analysis and decision-making, such as testing the performance of new aircraft components or monitoring engine behavior under different loads.

The 3000TA integrates multiple sensor interfaces, enabling it to connect seamlessly with various types of sensors, including temperature, pressure, and strain gauges. This versatility makes it suitable for a wide range of testing scenarios, from structural analysis to environmental monitoring. Users can customize the system to fit their specific needs, significantly enhancing its functionality.

Another significant advantage of the Teledyne 3000TA is its advanced wireless communication technology. By employing protocols like Bluetooth and Wi-Fi, it allows for remote data monitoring and access, which improves safety and convenience during testing processes. Engineers can easily gather data from hazardous environments without being physically present, ensuring both efficiency and safety.

The device is also equipped with an intuitive user interface, which simplifies the setup and operation processes. The touchscreen display provides real-time data visualizations and easy navigation through various menus, making it accessible even to those new to telemetry systems. This user-centric design reduces the learning curve and enhances overall productivity.

In terms of data integrity, the Teledyne 3000TA features robust error-checking and validation protocols. These built-in safeguards ensure that the data collected is accurate and reliable, which is crucial for making informed decisions based on telemetry data.

The system's compact and lightweight design ensures portability, allowing for use in various fields and environments. This flexibility enhances its appeal for field applications, where space and weight can be significant constraints.

In summary, the Teledyne 3000TA stands out as a versatile and reliable telemetry solution, combining high-performance data acquisition, advanced communication technologies, and user-friendly features. Its application across multiple industries makes it an invaluable tool for professionals seeking to optimize their testing and analysis processes.
Top Page Image Contents