Teledyne 3000TA quick start Electrical Connections

Page 7

Model 3000TA

Quickstart Guide

 

 

4.If using remote calibration feature:

•Connect zero gas to the ZERO IN port.

•Connect span gas to the SPAN IN port.

5.Otherwise, calibration gases must be Tee'd into the sample inlet with appropriate valves.

6.Regulate the sample gas pressure between 2 and 50 psig sufficient to keep the front panel flowmeter reading in an acceptable range (0.1 to 2.4 SLPM). For non- pressurized sample or very low pressure, (less than 2 psig) vacuum service plumbing is recommended.

7.If greater sample flow is required for improved response time, install a bypass in the sampling system upstream of the analyzer input.

8.For optional vacuum application where the sample pressure is at atmospheric or very low pressure, the instrument should be fitted with the vacuum service option. This option locates the flow control valve on the exhaust side of the Micro-fuel Cell.

Note: Exhaust connections must be consistent with the hazard level of the constituent gases. Check Local, State, and Federal laws, and ensure that the exhaust stream vents to an appropriately controlled area, if required.

Electrical Connections

CAUTION: READ ALL SAFETY INFORMATION REGARDING ELECTRICAL HAZARDS ASSOCIATIED WITH THIS INSTRUMENT BEFORE MAKING ELECTRICAL CONNECTIONS.

CAUTION: POWER IS APPLIED TO THE INSTRUMENT'S CIRCUITRY AS LONG AS THE INSTRUMENT IS CONNECTED TO THE POWER SOURCE. THE RED SWITCH ON THE FRONT PANEL IS FOR SWITCHING POWER ON OR OFF TO THE DISPLAYS AND OUTPUTS ONLY.

Teledyne Analytical Instruments

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model 3000TA Page Function Keys Front Panel Operator InterfaceData Entry Keys Rear Panel Equipment Interface Model 3000TA Quickstart Guide Gas Connections Mount the AnalyzerElectrical Connections Connect Digital Remote Cal Inputs Connect primary input powerInstall the fuse Connect Analog Outputs Connect Alarm RelaysNetwork I/O Install the Micro-fuel CellConnect the 9-pin D connector to the RS-232 serial port Connect Range ID ContactsQuickstart Guide Trace Oxygen Analyzer Using the Data Entry and Function Buttons Default ConfigurationAuto Ranging on Available Functions Entering the Password Password ProtectionZero Calibration Calibration of the AnalyzerManual Mode Zeroing Auto Mode Zero CalibrationManual Mode Spanning Auto Mode SpanningSpan Calibration Setting Alarm Parameters Fixed Range or Autoranging Analysis Set The Range FunctionAnalyze Function
Related manuals
Manual 89 pages 24.58 Kb

3000TA specifications

The Teledyne 3000TA is an advanced telemetry system designed for high-performance applications in various industries such as aerospace, automotive, and research. This innovative device combines cutting-edge technologies with user-friendly features, making it an essential tool for engineers and scientists alike.

One of the standout features of the Teledyne 3000TA is its robust data acquisition capabilities. It offers a high sampling rate, which allows users to capture rapid changes in measurements accurately. This is particularly beneficial for applications that require real-time data analysis and decision-making, such as testing the performance of new aircraft components or monitoring engine behavior under different loads.

The 3000TA integrates multiple sensor interfaces, enabling it to connect seamlessly with various types of sensors, including temperature, pressure, and strain gauges. This versatility makes it suitable for a wide range of testing scenarios, from structural analysis to environmental monitoring. Users can customize the system to fit their specific needs, significantly enhancing its functionality.

Another significant advantage of the Teledyne 3000TA is its advanced wireless communication technology. By employing protocols like Bluetooth and Wi-Fi, it allows for remote data monitoring and access, which improves safety and convenience during testing processes. Engineers can easily gather data from hazardous environments without being physically present, ensuring both efficiency and safety.

The device is also equipped with an intuitive user interface, which simplifies the setup and operation processes. The touchscreen display provides real-time data visualizations and easy navigation through various menus, making it accessible even to those new to telemetry systems. This user-centric design reduces the learning curve and enhances overall productivity.

In terms of data integrity, the Teledyne 3000TA features robust error-checking and validation protocols. These built-in safeguards ensure that the data collected is accurate and reliable, which is crucial for making informed decisions based on telemetry data.

The system's compact and lightweight design ensures portability, allowing for use in various fields and environments. This flexibility enhances its appeal for field applications, where space and weight can be significant constraints.

In summary, the Teledyne 3000TA stands out as a versatile and reliable telemetry solution, combining high-performance data acquisition, advanced communication technologies, and user-friendly features. Its application across multiple industries makes it an invaluable tool for professionals seeking to optimize their testing and analysis processes.
Top Page Image Contents