Omron NE- C801KD instruction manual Preparing the nebuliser for use, Connecting AC adapter

Page 11

2. Preparing the nebuliser for use

Warning:

Clean and disinfect the nebuliser kit, kids accessory, mask or mouthpiece before using them for the first time after purchase.

If the device has not been used for a long period of time, or if more than one person uses the same device, clean and disinfect the nebuliser kit, kids accessory, mask or mouthpiece before using them.

For directions on cleaning and disinfecting refer to Section 4 (page 16-18).

Note: Make sure that the air filter is changed regularly. Refer to Section 6 “Changing the air filter” (page 20).

2.1Connecting AC adapter

1.Make sure that the power switch is turned off.

Check that the power switch is in the off ( ) position.

2.Inserting the power plug of the AC

adapter into the power connector on the compressor.

Power Plug

Power Connector

3. Plug the AC adapter into a power

Power Outlet

outlet.

 

Note: When disconnecting the AC

 

adapter, unplug the AC adapter

 

from the power outlet before

 

removing the power connector

 

on the compressor.

 

EN

11

Image 11
Contents Model NE-C801KD Quick Manual Connecting AC adapter Introduction ContentsIntended use Usage Important safety instructionsUsage Save these instructions for future reference General Safety PrecautionsNebuliser Kit Compressor Main Unit Know your unitAccessories Preparing the nebuliser for use Connecting AC adapterAdding medication and assembling the parts Page Hold the nebuliser kit as indicated on the right Taking medicationPage Cleaning and daily disinfecting Disinfecting the nebulising parts Always clean before disinfection. See .1 CleaningAn example of commercially available disinfectant Maintenance and storage Changing the air filter Problem Cause Remedy TroubleshootingName Model Type Rating AC adapter Technical dataTechnical data Technical data Air Tube PVC, 100cm Air Tube Silicon, 100cm Optional parts and accessoriesOmron Santé France SAS