2.Preparing the nebuliser for use
2.2Adding medication and assembling the parts
1. Remove the mask or mouthpiece, kids accessory and cap from the nebuliser kit.
2. Remove the inhalation top from the medication tank.
1) Rotate the inhalation top
2) Lift the inhalation top out of the medication tank.
3. Add the correct amount of prescribed medication to the medication tank.
Caution:
The capacity of the medication tank is 2 to 7 ml.
Note: Scales on the nebuliser kit are for reference only. The scale on the outside of the tank is with no vaporiser head in place. Please use the scale on your syringe or vial for accurate measurement of medication.
4.Make sure that the vaporiser head is securely
attached to the inhalation top.
5. Put the inhalation top back inside the medication tank.
1) Align the protrusion on the inhalation top with the indent on the medication tank, as shown.
2) Rotate the inhalation top clockwise and align with the medication tank until they click in place.
12