ResMed Pixi manual Emergency removal, Disassembly steps

Page 16

Emergency removal

In the event of an emergency, remove the mask by placing your finger under the lower headgear strap and firmly pulling it away from the child – this will activate the quick release clip. Do not use this removal method under normal circumstances.

Disassembly

Disassembly steps

1.Detach the headgear from the mask frame by unlatching each of the lower headgear arms from the frame nodes.

2.Remove the combined elbow and air tubing from the mask.

3.Remove the plug from the cushion.

4–5. Remove the cushion from the frame by gently pushing it through from the front of the frame and pulling it away from the rear of the mask frame.

WARNING

When disassembling the mask, always keep all accessories and components out of the reach of small children as small parts might present a choking hazard. Seek immediate medical attention if choking occurs or if any small part has been swallowed.

10

Image 16
Contents Pixi TM Contents / Inhalt / Contenu / Dotazione / Innehåll Indhold / Innhold / SisältöPage Iii 61033 Description / Beschreibung / Description Intended use Changing the side of the air tubing Set upAttaching the headgear Set up Fitting Fitting stepsFitting Adjustment Adjustment stepsAttaching the pressure port Attachment stepsCushion check Cushion check stepsRemoval Removal stepsDisassembly steps DisassemblyEmergency removal Disassembly Headgear reassembly Headgear reassembly stepsEnglish Reassembly Reassembly stepsCleaning the mask Daily/After each useTroubleshooting Page Technical specifications InformationSymbols Consumer warrantyStorage DisposalManufacturer Distributed by User