ResMed Pixi manual Intended use

Page 7

Pixi

pediatric MASK

Thank you for choosing the Pixi Pediatric mask. Please read the entire manual before use.

Intended use

The Pixi Pediatric mask channels airflow noninvasively to a patient from a continuous positive airway pressure (CPAP) or bilevel device (‘device’). The Pixi Pediatric mask is:

•• to be used by children aged between 2 and 7 for whom continuous positive airway pressure (CPAP) or bilevel therapy has been prescribed

•• intended for single-patient re-use in the home and single patient re-use in the hospital/institutional environment.

English

WARNING

•• This mask is designed to provide a stable effective air seal with minimum headgear tension. High headgear tension may lead to facial deformities with long-term use. Regular clinician review of growth patterns and the use of different styles of mask is recommended.

•• The mask must be used under qualified supervision for patients who are unable to remove the mask by themselves.

•• The mask may not be suitable for those predisposed to aspiration.

•• If the mask is prescribed for children with serious congenital conditions or cognitive impairments, then using a device with appropriate alarms is recommended.The correct operation of the complete patient circuit, including alarms must be tested before commencing therapy.

•• Follow all precautions when using supplemental oxygen.

•• Oxygen flow must be turned off when the CPAP or bilevel device is not operating, so that unused oxygen does not accumulate within the device enclosure and create a risk of fire.

•• Oxygen supports combustion. Oxygen must not be used while smoking or in the presence of an open flame. Only use oxygen in well ventilated rooms.

•• The vent holes must be kept clear and must not sit against the nose.

•• The mask should not be used unless the device is turned on. Once the mask is fitted, ensure the device is blowing air.

1

Image 7
Contents Pixi TM Indhold / Innhold / Sisältö Contents / Inhalt / Contenu / Dotazione / InnehållPage Iii 61033 Description / Beschreibung / Description Intended use Changing the side of the air tubing Set upAttaching the headgear Set up Fitting steps FittingFitting Adjustment steps AdjustmentAttachment steps Attaching the pressure portCushion check steps Cushion checkRemoval steps RemovalDisassembly steps DisassemblyEmergency removal Disassembly Headgear reassembly steps Headgear reassemblyEnglish Reassembly steps ReassemblyDaily/After each use Cleaning the maskTroubleshooting Page Information Technical specificationsDisposal SymbolsConsumer warranty StorageManufacturer Distributed by User