Reassembly
Reassembly steps
1.Insert each side of the cushion into the sockets of the mask frame. Ensure the cushion is oriented correctly. The arrows on the cushion should be pointing up towards the plug tether. The raised vented area of the cushion should also be sitting up against the mask frame.
2.Pull the arms of the cushion through until the collar of the cushion shoulder is sitting against the mask frame.
3.Replace the plug into the appropriate side of the cushion.
4.Insert the combined elbow and air tubing into the other side of the cushion, ensuring that it is fully inserted.
5.Reattach the headgear. Refer to the Attaching the headgear illustrations in this user guide.
1
2
3
4
14