7.Auto off feature to conserve battery power:The base unit will au- tomatically turn off after 30 minutes if there is no change in tem- perature or no buttons are pressed.The remote unit will vibrate then automatically turn off if the transmission signal is lost for 5 minutes.The remote unit will also turn off automatically if the base is turned off.
Positioning the thermometer units
1. The base unit may be placed on a flat surface using the clip stand on the back of the unit. It may also be attached to a metal surface using the magnets on the back.
2. The remote sensor’s clip stand may be used to stand the remote on a flat surface or clip on a belt loop.The magnets may be used to attach it to a metal surface. Use the lanyard to wear it around the neck (take care not to allow the remote to touch hot items or working appliances). Simply thread the lanyard through the open- ing on the remote and loop the lanyard through itself.
3. During use, keep the base unit and5 remote sensor within effective transmission range, which is 200 feet in usual circumstances.
4. Do Not stick to surfaces that exceed 200°F (100°C).
Thermometer Programming
Operation
1. Your thermometer is preset to read temper- atures in Fahrenheit.To switch to Celsius, push the switch on the back of the base unit to ºC.
2. If necessary, press the “On/Off” buttons. The default setting “Beef” appears.