Taylor 532, 1479-21 instruction manual Beeps = Minutes from done

Page 10

6.As time progresses, the base and remote units will signal timer alerts in the following manner:

• 10 minutes before the time is up, the remote will beep 3 times, vibrate and flash. The base will beep 3 times and flash.

Note: that the unit uses to different beep tones to help you iden- tify between thermometer and timer notifications. Only the re- mote will vibrate.

3 beeps =

10 minutes from done

5 minutes before the time is up, the remote will beep 5 times, vi- brate and flash.The base will beep 5 times and flash.

When the timer reaches zero, the10 units consistently beep, vibrate

and flash (only remote vibrates)5 beeps =5 minutes from donePress “Start/Stop”to stop beepsConstant beeps = done

Image 10
Contents Please Read Page LCD Battery InformationTo install or replace the batteries on both units Remote SensorOn/Off Operation Do Not stick to surfaces that exceed 200F 100C Positioning the thermometer unitsThermometer Programming Operation Taste.The Set Tempera Meat type.The defaultCrease the temperature by 1 de Gree. Note whenGeneral Cooking Procedures ReadingsPerature.8 Confirm. Press and hold Timer OperationPress the Hr/+ but CountdownBeeps = Minutes from done Unit, you can press the reset button on Clock FeatureReset If you are having problems with Care and PrecautionsDo not use this thermometer in a microwave oven Minimum Internal Cooking Temperatures asIncrease or MIN/- to decrease the temperature by 1 degree Recommended by the UsdaTransmission Collision One Year Limited Warranty