Taylor 1479-21, 532 Clock Feature, Hold the buttons to ad, Reset If you are having problems with

Press “Select”

7.Press the “Start/Stop” button on the base unit to stop the alarm and timer.

8.The timer will time up to 39 hours, 59 minutes and 59 seconds. (The seconds will appear when remaining time is less than one minute).

Clock Feature

To program the clock:

1. While the base unit is off, press the “Select” button.The clock digits flash.

2. Press the “Hr/+” but-
ton to change the
hour.Press the “Min/-”
button to change the
minutes. Press and	Press “Hr/+” and then Press “Min/-” to set time
hold the buttons to ad-
vance the digits quickly.

3. Press “Select”.The clock is set.	11
RESET: If you are having problems with the		Press “Select”
unit, you can press the reset button on the

back of the base.This will cause the same effect as taking the bat- teries out.The unit will reset itself.

Care and Precautions

1. Always wear a heat resistant glove when touching the metal probe or cord during or just after cooking. DO NOTTOUCH WITH BARE HANDS!

2. Keep the metal probe and cord away from children.

3. Sterilize metal probe each time before use.

4. Do not expose the thermometer to: water,direct heat, a hot sur- face or direct sunlight for an extended period of time.This may cause damage to the plastic casing or the electric circuits and components inside.