TAKING YOUR BLOOD PRESSURE
4.Press the START button. The average reading (see Pg.
NOTE: If an appropriate pressure is not obtained, the device automatically starts to inflate again.
CAUTION: If you wish to stop inflation at any time, press the START button again.
5.When the measurement is complete, the systolic and diastolic pressure read- ings and pulse rate are displayed. The cuff deflates and the monitor automati- cally shuts off after 60 seconds, or you can turn it off by pressing the START button. Your measurement is automatically stored in memory (the monitor can store up to 90 readings in memory).
SYSTOLIC
PULSE
DIASTOLIC
6.Remove cuff and make note of your blood pressure and pulse rate on the Blood Pressure Record chart in the back of the manual, indicating the date and time of measurement.
IMPORTANT: Measure blood pressure at the same time each day.
Auto Control Medical (Toll Free): |