LifeSource UA-787W manual Troubleshooting

		TROUBLESHOOTING
Problem	Probable cause	Corrective action
		Replace all batteries with new
	Batteries are drained.	ones. Alkaline batteries recom-
Nothing appears in the		mended.
display, after I press the		Reinstall the batteries with
START button.	Battery terminals are not in	negative and positive terminals
	the correct position.	matching those indicated in the
		battery compartment.
	Battery voltage is too low.
The cuff does not	Low battery symbol blinks.	Replace all batteries with new
	[If the batteries are drained	ones. Alkaline batteries recom-
inflate.
	completely, the mark does	mended.
	not appear.]
	The cuff is not fastened	Fasten the cuff correctly.
	properly.
	You moved your arm or body	Make sure you remain very still
		and quiet during the measure-
The unit does not mea-	during the measurement.
		ment.
sure. Readings are too
		Sit comfortably and still. Make
high or too low.	The cuff position is not cor-
		sure the cuff is at the same
	rect.
		level as your heart.
	You are using the wrong size	See Pg. E-4 “Selecting the
	cuff.	Correct Cuff.”
	The healthcare professional	See Pg. E-15 “Answers to Why
		Your Readings Are Different
The value is different	may be using a different sized
		Between Home and the
from that measured	cuff.
		Doctor’s Office.”
at a clinic or doctor’s
	Your measurements may be
office.		See Pg. E-14 “Why Measure
	elevated by white coat hyper-
		Blood Pressure at Home.”
	tension

NOTE: If the actions described above do not solve the problem, call 1-800-461-0991. Do not attempt to repair the device yourself.

Auto Control Medical (Toll Free): 1-800-461-0991 E-17