Lumiscope 1131 specifications Clearing Values from Memory

Clearing Values from Memory

1. Press the User-Switching key to select the memory zone 1 or memory zone 2.

2.Continue to press and hold the “M” key for approximately 5 seconds, and the data in the pre- designated memory zone will be erased automatically.

Press “M” Key for

5 seconds to clear all memories

Note : The data in both memory zones (zone 1 and zone 2) will be erased if any of the batteries are removed, or if the AC adapter is disconnected from the unit or unplugged from the outlet. (It is suggested that users record their data on the Blood Pressure Log before removing or replacing batteries.)

11