Lumiscope 1131 specifications Recalling Values from Memory

Recalling Values from Memory

1.The Monitor has two Memory Zones (1 and 2). Each zone can store up to 50 measurements.

2.To read memory values from a selected Memory Zone, use the “User-Switching Key” to select a Memory Zone (1 or 2) from which you want to recall values from. Then, press the “M” key, and the values will be shown on the LCD display with an assigned memory sequence number.

3.The monitor will display an average of the previous measurements first. Every new press of the “M” key calls for one set of prior values stored. Latest memory will be recalled first. The calculated average will be applied to a maximum of the last 3 memories.

10