Lumiscope 1131 specifications Installing Battery, Using the AC adapter

Page 6

Installing Battery

1.Press down and lift the battery cover in the direction of the arrow to open the battery compartment.

2.Install or replace 4 “AA” sized batteries in the battery compartment according to the indications inside the compartment.

3.Replace the battery cover by clicking in the bottom hooks first, then push in the top end of the battery door.

You need to replace the batteries when:

1.low battery icon appears on display.

2.the ON/OFF/START button is pushed and nothing appears on display.

Caution:

Batteries are hazardous waste.

 

Do not dispose together with the household garbage.

Using the AC adapter

1.Connect the AC adapter with the AC adapter jack in the back of the unit.

2.Plug the AC adapter into a standard wall socket.

Caution:

1. Please unload the batteries when operating

 

with the AC mode for a longer period of time

 

Leaving the batteries in the compartment for

 

a long time may cause leakage, which may

 

lead to damage of the unit.

 

2. No batteries are needed when operating with the AC adapter.

6

Image 6 Contents
Blood Pressure Monitor Model Introduction Name/Function of Each PartQuick Read Measuring Technology About Blood PressureBlood Pressure Standard Blood Pressure FluctuationDisplay Explanation IconsInstalling Battery Using the AC adapterApplying the arm cuff CuffMeasurement Procedure Measurement Procedure Recalling Values from Memory Clearing Values from Memory Time Adjustment Helpful Tips Troubleshooting ON/OFF/STARTDo not use on unconscious patients Specifications Two-Year Limited Warranty
Related manuals
Manual 17 pages 29.35 Kb