Omega Engineering HH507R manual Relative value Recall display mode, Button

Page 11

3.Time set mode, (Press ENTER key can escape Time set mode) = = : = = = = is displayed in third display. Time (hours, minutes, seconds) value is entered via overlay numbers, then press overlay ENTER key. Time start from set time value and exit set mode.

10Relative value Recall display mode

Press REL RECALL key to display the Relative set value on second display. Press REL RECALL key again to exit this mode.

11Hi/Lo Limits value Recall display mode

Press Hi/Lo RECALL key to display the Hi set Limit value on second display. Press Hi/Lo RECALL key again to display the Lo Limits set value on second display. Press Hi/Lo RECALL key again to exit this mode.

12"" Button

Press "" button to toggle on and off of backlight. The backlight will switch- off automatically after 60 seconds.

Image 11

Contents Omega Omega.comTM Introduction Safety InformationElectrical SpecificationsT/E-TYPE Environmental Operating Instructions Power SwitchF Selecting the Temperature Scale Hold Mode only Main displayJ/T/E/R/S/N T1 Input Thermocouple Type Select Main display Timer STOP-WATCH ModeMIN MAX with Time record Mode only Main display REL Relative mode only Main display Hi/Lo Limits mode only Main display Button Relative value Recall display mode11 Hi/Lo Limits value Recall display mode Battery Replacement Operator MaintenanceRS-232 Operation Using Quick Basic END if CLS Locate 13 RS-232 Transmit and Receive Comammand Summary Output Data Formats LSD MSD Communication HH 506R/HH 507R Calibration Procedure Warranty / Disclaimer 2814/0799