Omega Engineering HH507R Timer STOP-WATCH Mode, MIN MAX with Time record Mode only Main display

Page 8

4TIMER STOP-WATCH Mode

Press TIMER STOP-W key to enter stop-watch mode stop-watch is displayed in second display. Press start/stop key to toggle stop-watch starts and stops (Time goes up to 99 minutes & 59.9 seconds). In the this mode the automatic power-off feature is disabled.

Pess Clear key to zero the stop-watch.

Press TIMER STOP-W key again to exit the stop-watch mode.

5K/J/T/E/R/S/N T1 Input Thermocouple Type Select (Main display)

The TYPE key circulating selects the K/J/T/E/R/S/N type thermocouple as input.

When the thermometer is turned on, it is set to the type selected that was in use when the thermometer was last turned off.

6MIN MAX with Time record Mode (only Main display)

Press MIN MAX key to enter the MIN MAX Recording mode, (displays the Maximum reading with time, Minimum reading with time and Average

reading stored in record mode). In the this mode the automatic power-off feature is disabled and key, °C/°F key, REL key, SET key, Hi/Lo Limits key and TYPE key are disabled.

The beeper emits a tone when a new minimum or maximum value is recorded.

6

Image 8
Contents Omega Omega.comTM Safety Information IntroductionSpecifications ElectricalT/E-TYPE Environmental Power Switch F Selecting the Temperature ScaleHold Mode only Main display Operating InstructionsJ/T/E/R/S/N T1 Input Thermocouple Type Select Main display Timer STOP-WATCH ModeMIN MAX with Time record Mode only Main display REL Relative mode only Main display Hi/Lo Limits mode only Main display Button Relative value Recall display mode11 Hi/Lo Limits value Recall display mode Operator Maintenance Battery ReplacementRS-232 Operation Using Quick Basic END if CLS Locate 13 RS-232 Transmit and Receive Comammand Summary Output Data Formats LSD MSD Communication HH 506R/HH 507R Calibration Procedure Warranty / Disclaimer 2814/0799