Omega Engineering HH507R manual Introduction, Safety Information

Page 3

INTRODUCTION

This instrument is a 4½ digit, compact-sized portable digital thermometer designed to use external K/J/T/E/R/S/N-type thermocouples as temperature sensor. Temperature indication follows Reference Temperature/Voltage Tables (N.I.S.T. Monograph 175 Revised to ITS-90) for K/J/T/E/R/S/N-type thermo- couples. One K-type thermocouple are supplied with the thermometer.

SAFETY INFORMATION

It is recommended that you read the safety and operation instructions before using the thermometer.

WARNING

To avoid electrical shock, do not use this instrument when working

voltages at the measurement surface over 24V AC or DC.

WARNING

To avoid damage or burns, do not make temperature

measurement in microwave ovens.

CAUTION

Repeated sharp flexing can break the thermocouple leads. To prolong lead life, avoid sharp bends in the leads, especially near the connector.

The symbol on the instrument indicates that the operator must refer to an explanation in this manual.

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Omega Omega.comTM Introduction Safety InformationElectrical SpecificationsT/E-TYPE Environmental Operating Instructions Power SwitchF Selecting the Temperature Scale Hold Mode only Main displayTimer STOP-WATCH Mode MIN MAX with Time record Mode only Main displayJ/T/E/R/S/N T1 Input Thermocouple Type Select Main display REL Relative mode only Main display Hi/Lo Limits mode only Main display Relative value Recall display mode 11 Hi/Lo Limits value Recall display modeButton Battery Replacement Operator MaintenanceRS-232 Operation Using Quick Basic END if CLS Locate 13 RS-232 Transmit and Receive Comammand Summary Output Data Formats LSD MSD Communication HH 506R/HH 507R Calibration Procedure Warranty / Disclaimer 2814/0799
Top Page Image Contents