Omega Engineering HH507R manual Communication

Page 18

COMMUNICATION

4612-IR232

 

RS232C CABLE

PORT

 

507R

RS-232C "COM1"

 

1.Install the RSR232C cable between computer "COM1" and Thermometer RS232C port.

2.Turn on Thermometer.

3.Utilize the Quick BASIC for inputting programs.

4.Use the capital control letter and input "A" letter from the keyboard to start sending messages to computer.

5.Input "C" letter from the keyboard and then you can change the temperature scale.

6.Input "F" letter from the keyboards and then you can circulating select the T1 input type.

7.Input "G" letter from the keyboard and then the meter enter record mode, and then you can push "G" again to circulate through Maximum/Minimum/Average/ Record mode.

8.When you want to stop transmission mode you should push "B" letter from the keyboard in order to conserve battery life.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Omega Omega.comTM Safety Information IntroductionSpecifications ElectricalT/E-TYPE Environmental Hold Mode only Main display Power SwitchF Selecting the Temperature Scale Operating InstructionsTimer STOP-WATCH Mode MIN MAX with Time record Mode only Main displayJ/T/E/R/S/N T1 Input Thermocouple Type Select Main display REL Relative mode only Main display Hi/Lo Limits mode only Main display Relative value Recall display mode 11 Hi/Lo Limits value Recall display modeButton Operator Maintenance Battery ReplacementRS-232 Operation Using Quick Basic END if CLS Locate 13 RS-232 Transmit and Receive Comammand Summary Output Data Formats LSD MSD Communication HH 506R/HH 507R Calibration Procedure Warranty / Disclaimer 2814/0799
Top Page Image Contents