Panasonic CS-K18PKF, CU-K18PKF, CU-K24PKF, CS-K24PKF installation instructions Safety, Power Supply

Power supply

Use complete power supply cord without joining. In unavoidable circumstances that complete power supply cord without joining is impossible, use an approved connection means (for example: socket and plug).

CAUTION

Indoor unit and outdoor unit

Do not wash the indoor unit with water, benzine,

Power

Supply

◄

Complete wire without joining

OR

◄

Approved connecting means (for example: approved socket and plug)

Air Conditioner

Indoor Unit

Complete

wire without ◄ joining

Outdoor

Unit

thinner or scouring powder to avoid damage or corrosion at the unit.

Do not use for preservation of precise equipment, food, animals, plants, artwork or other objects. This may cause quality deterioration, etc.

Do not use any combustible equipment in front of the airflow outlet to avoid fire propagation.

Do not expose plants or pet directly to airflow to avoid injury, etc.

Do not touch the sharp aluminium fin, sharp parts may cause injury.

Do not switch ON the indoor unit when waxing the floor. After waxing, aerate the room properly before operating the unit.

If the supply cord is damaged, it must be replaced by the manufacturer, service agent or similarly qualified persons in order to avoid a hazard.

It is strongly recommended to be installed with Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD) to prevent electric shock or fire.

To prevent overheating, fire or electric shock:

•Insert the power plug properly.

•Dust on the power plug should be periodically wiped with a dry cloth.

Stop using the product if any abnormality/failure occurs and disconnect the power plug or turn off the power switch and breaker.

(Risk of smoke/fire/electric shock) Examples of abnormality/failure

•The ELCB trips frequently.

•Burning smell is observed.

•Abnormal noise or vibration of the unit is observed.

•Water leaks from the indoor unit.

•Power cord or plug becomes abnormally hot.

•Fan speed cannot be controlled.

•The unit stops running immediately even if it is switched on for operation.

•The fan does not stop even if the operation is stopped.

Contact your local dealer immediately for maintenance/repair.

This equipment must be earthed to prevent electrical shock or fire.

Prevent electric shock by switching off the power supply and unplug:

-Before cleaning or servicing,

-When extended non-use, or

-During abnormally strong lightning activity.

Do not install the unit in oily and smoky areas to prevent damage to the unit.

Do not dismantle the unit for cleaning purpose to avoid injury.

Do not step onto an unstable bench when cleaning the unit to avoid injury.

Do not place a vase or water container on the unit.

Water may enter the unit and degrade the insulation.

This may cause an electric shock.

Do not open window or door for long time during

COOL/DRY mode operation.

	Prevent water leakage by ensuring drainage pipe is:
	- Connected properly,
	- Kept clear of gutters and containers, or		precautions
	- Not immersed in water
	After a long period of use or use with any
	combustible equipment, aerate the room regularly.
	After a long period of use, make sure the installation		Safety
	rack does not deteriorate to prevent the unit from
	falling down.
Remote control
	Do not use rechargeable (Ni-Cd) batteries. It may		English
	damage the remote control.
	To prevent malfunction or damage of the remote
	control:
	• Remove the batteries if the unit is not going to be
	used for a long period of time.
	• New batteries of the same type must be inserted
	following the polarity stated.
Power supply
	Do not disconnect the plug by pulling the cord to
	prevent electric shock.
		15

F568980_YA0113-1_EN.indd 15

1/17/2013 10:10:03 AM