Citizen CH-485E Correcting the minute of an alarm time, Correcting the hour of an alarm time

3. Correcting the “minute” of an alarm time

●Press “SELECT” switch for one second or more to place the

unit in the alarm-time minute correction state.

● Press “SET” switch to increase the minute of the alarm time in increments of one minute.

4. Correcting the “hour” of an alarm time

●After the completion of the alarm-time minute correction as

described above, press “SELECT” switch to place the unit in the alarm-time hour correction state.

● Press “SET” switch to increase the hour of the alarm time in increments of one hour.

5. Correcting the “second” of the current time

●After the completion of the alarm-time hour correction as de-

scribed above, press “SELECT” switch for one second or more to place the unit in the current-time second correction state.

●Press “SET” switch to reset the second indication to 00. Press

“SET” switch according to a time signal. Note that the minute indication on the display will advance when the seconds given is 30 to 59 seconds of a minute.

6. Correction of the “minute” of the current time

●After the completion of the current-time second correction as

described above, press “SELECT” switch to place the unit in the current-time minute correction state.

●Press “SET” switch to increase the minute of the current time

in increments of one minute.

- Eng 8 -