HOW TO SET THE CLOCK
1.Initial state (when the batteries are loaded in the unit for the first time, carry out resetting operation)
* Date/hour/alarm setting when the batteries have been loaded in the unit for the first time
Date and time: 12:00 am, January 1, 2002
Alarm: | 12:00 am, alarm is in OFF state |
English |
2. Data correcting procedure
The alarm time, current time and calendar should be set in the written order.
*Every press on “SELECT” switch selects a data item to be modified in the order shown below. The selected item flashes on and off.
1) | Alarm, minute / 2) Alarm, hour / 3) Second / 4) Minute / 5) Hour / |
6) | Year / 7) Month / 8) Day of month / 9) Time system |
*Press “SET” switch to increase the indicated value in increments of one. Keep “SET” switch held pressed to carry out correction quickly.
*The aforementioned switch performance will not be carried out for the correction of “3) Second” and “9) Time system
*After the completion of correction of all items as required, press “POWER/MEASURE” switch to restore the time indication to the display.
Data indicating section
Time indicating section
“MODE” switch
“SET” switch
- Eng 7 -