Toshiba RAV-SM564CT-E Part name Procedure Remarks Heat, Exchanger Recover refrigerant gas

No.	Part name	Procedure	Remarks
12	Heat	1. Detachment
	exchanger	1) Recover refrigerant gas.

2)Remove the refrigerant pipe at indoor unit side.

3) Perform work of procedure 10 -1. Piping cover

4)Take off screws (Ø4 × 10, 3 pcs.) fixing the piping cover to remove the piping cover.

5)While holding the heat exchanger, remove

fixing band and fixing screws (Ø4 × 10, 3 pcs.) and then remove the heat exchanger.

2. Attachment
1) Mount parts in order, heat exchanger
→ fixing band → piping cover → drain pan	3 screws

→bell mouth → electric parts box as original.

NOTE)

Arrange wires as original.

2)Attach the removed connectors and wires as original.

3)Connect the refrigerant pipe as original, and then perform vacuuming.

Fixing band	Fixing band for
	heat exchanger

<Details of sensor lead wire drawing>

TCJ sensor

(Black)

TC sensor (Red)

Wind pipe cover over the header,
attach a sensor on it.	2 fixing screws for heat exchanger
(Do not set the head of tie wrap upward.)

– 96 –