Radio Shack 49-2551A owner manual Mounting Accessories, Mounting The Wireless Sensor Transmitters

49-2551AB.fm Page 17 Friday, February 19, 1999 3:41 PM

MOUNTING ACCESSORIES

MOUNTING THE WIRELESS SENSOR TRANSMITTERS

You can install any combination of wireless sensor transmitters (Cat. No. 49-2585) and motion detectors (Cat. No. 49-2589), in up to 16 zones.

Follow these steps to mount each wire- less sensor transmitter.

1.Set the DELAY switch on the wireless sensor transmitter to MIN to protect a win- dow or to MAX to protect a door.

Note: The MAX setting allows you to arm a sen- sor with a 60- second exit delay and a 30-second entry delay (see “Instant/Delay Mode” on Page 26).

When set to MIN, the sensor immediately triggers the alarm when a window opens, even if you armed the system in the delay mode.

2.Select a location for the wireless sensor transmitter. We recom- mend that you purchase enough sensors to protect the front and back door and any windows that

are hidden from view or easily accessible (including basement windows).

Note: The supplied sensor and magnetic switch are already con- nected. If the wire is too long, you can shorten it by cutting it to the length required, stripping the ends, and re-connecting it to the magnetic switch.

3.Remove the sensor’s batteries and attach it to the wall using the supplied screws, or use double- sided mounting tape (Cat. No. 64- 2361).

First attach the sensor’s back cover to the wall, then slide the sensor onto the cover. Replace the batteries (if you removed them) and close the battery com- partment door.

4.Align the arrows on the switch and magnet, and install the switch and magnet using the supplied screws or double-sided mounting tape.

17