INTRODUCTION
You can install your RadioShack Wire- less Home Security System with Emer- gency Phone Dialer anywhere in your house using the existing house wiring. The system operates using radio fre- quencies, thus eliminating the need for additional wiring. It includes a hand- held remote, one keychain remote, two wireless sensor transmitters, a motion detector, and a lamp module so you can immediately begin using your sys- tem. The console can monitor up to 16 security zones (with additional remote sensors) and sound its
Here are some of the features of your system.
Two Wireless Sensor Transmitters
—trigger the console’s
Handheld Remote — lets you arm and disarm the system and control the lights connected to Plug ’n Power mod- ules (additional handheld remotes, Cat. No.
Keychain Remote — lets you conve- niently arm and disarm the system as you come and go and turn on/off lights and appliances (additional keychain remotes, Cat. No.
Lamp Module — lets you turn on/off a lamp using a remote control. The lamp also flashes on and off during an alarm (additional lamp modules, Cat. No. 61- 2682).
Motion Detector — protects an area where an intruder might enter (addi- tional motion detectors, Cat. No. 49- 2589).
Plug ’n Power Compatible Design — lets you add a total of 16 wireless sen- sor transmitters, lamp modules, mo- tion detectors, and other accessories to customize your home security sys- tem.
Supervised Operation — keeps track of each wireless sensor transmitter’s status and alerts you if there is a prob- lem (such as an intrusion or a low bat- tery).
Please read this entire manual careful- ly so you understand how to correctly install and use this security system.
© 1999 Tandy Corporation.
All Rights Reserved.
RadioShack and Plug ’n Power are registered trademarks used by Tandy Corporation.
2
