6.If you want to hear the message again, set INSTALL/RUN 1/RUN 2 on the console to INSTALL and then back to RUN 1 or RUN 2.
Repeat Steps
TESTING THE DIALER
1.Set INSTALL/RUN 1/RUN 2 on the console to RUN 1.
2.Call your friend or neighbor to let them know you are going to test the system.
3.Press ARM on the console (or on a keychain remote control) to arm the system. Then trip the panic alarm by pressing ARM and DIS- ARM at the same time on a key- chain remote control.
The console sounds its alarm, lamps attached to remote mod- ules flash on and off, and the tele- phone dialer begins dialing and playing its message. If the person called does not answer within about 48 seconds, or answers but does not press a number, the con- sole calls the next number (up to four phone numbers).
4.Press DISARM on the remote con- trol to turn off the system and stop the dialer. Press
LIGHTS OFF on the remote con- trol to turn off lights connected to modules.
25
