Looking at the back of the motion de- tector, set the switch on the left side to 1 (most sensitive) or 2 (less sensitive). When set to 1, the motion detector trips the alarm if any movement is detected. When set to 2, the motion detector must detect two movements or contin- uous movement within a short time be- fore it trips the alarm (this makes it less sensitive to pets).
To use the tape, place it over the lower zones of the detector’s lens.
TESTING THE MOTION DETECTOR
The motion detector includes a special test mode. Follow these steps to test the motion detector.
1.Set the sensitivity switch on the back of the motion detector to 1.
2.Hold down TEST on the back of the motion detector until the indi- cator on the front flashes twice.
MAKING A PET ZONE
If you have a pet, you can help reduce the chance the pet will cause a false alarm by blocking the motion detec- tor’s lower zones with the supplied piece of masking tape.
20
