TROUBLESHOOTING
If you experience problems with your security console or accessories, try correcting the problem as suggested in this section. If you cannot correct the problem, contact your local RadioShack store for assistance.
| Problem |
|
| Solution |
|
| |||
|
| |||
The system does not arm. | Check that INSTALL/RUN 1/RUN 2 on the console is | |||
|
|
| in the RUN 1 or RUN 2 position. | |
|
|
|
| |
|
|
| If you are using a remote control to arm the system, | |
|
|
| check that the battery indicator on the remote con- | |
|
|
| trol turns on when you press ARM on the keychain | |
|
|
| remote control or ARM HOME/ARM AWAY on the | |
|
|
| handheld remote control. Replace the battery and | |
|
|
| ||
|
|
|
| |
A zone | indicator | flashes | One of the sensors/motion detectors has not re- | |
slowly. |
|
| ported in during the past 4 hours. | |
|
|
|
| |
|
|
| Check the battery in the sensor/motion detector to | |
|
|
| see if it needs to be replaced, or bypass the zone. | |
|
|
|
| |
A zone | indicator | flashes | You pressed BYPASS on the console to arm the | |
rapidly. |
|
| system while a sensor/motion detector was report- | |
|
|
| ing a problem. Correct the problem. The zone arms | |
|
|
| automatically when the problem is corrected. | |
|
| |||
You hear a repetitive trou- | Check the zone indicators. If a door or window is | |||
ble alarm when you try to | open, its zone indicator is on. If there is a problem | |||
arm the system, and it does | with a sensor or motion detector, its zone indicator | |||
not arm. |
|
| flashes slowly. You can correct this two ways: | |
|
|
| • | Press DISARM. Check that each wireless sen- |
|
|
|
| sor transmitter is working properly and that |
|
|
|
| you have not left a door or window open. Then |
|
|
|
| arm the system. |
|
|
| • | While the trouble alarm is sounding, press and |
|
|
|
| hold BYPASS on the console to override the |
|
|
|
| problem zone (its zone indicator then flashes |
|
|
|
| rapidly). Then arm the system. |
|
|
|
|
|
31