Problem | Solution | |
|
| |
|
| |
The alarm trips when you | Arm the system in the delay mode. Set the DELAY | |
enter the house before you | switch on the entry door sensor to MAX. Set the EN- | |
have time to disarm it. | TRY switch on the handheld remote control to DE- | |
| LAY, and then press ARM HOME or ARM AWAY on | |
| the handheld remote control. | |
|
| |
You cannot turn lights on or | Make sure you set the house and unit code on the | |
off using the LIGHT ON or | module(s) to the same letter and number as the | |
LIGHT OFF buttons on the | console. | |
remote. |
| |
If you have more than one console, ensure that you | ||
| ||
| set both to the same house and unit code. | |
|
| |
| Be sure the light you are trying to control is plugged | |
| in and has its on/off switch in the on position, and | |
| that its bulb is good. | |
|
| |
| Plug the module into another outlet on the same | |
| electrical circuit as the console. | |
|
| |
| Check that the battery indicator on the remote con- | |
| trol comes on when you press a button. Replace | |
| the battery and | |
| necessary. | |
|
| |
You open a door or window | Check to see if the system is armed. | |
and the alarm does not trip. |
| |
Be sure INSTALL/RUN 1/RUN 2 on the console is set | ||
| ||
| to RUN1 or RUN 2. | |
|
| |
| Press TEST on the wireless sensor transmitter and | |
| see if the alarm trips. If the alarm does not trip, see | |
| if the sensor indicator comes on when you press | |
| TEST. If the indicator does not come on, replace the | |
| battery and | |
|
|
32