Toshiba RAV-SM1404BT-TR, RAV-SM454MUT-E, RAV-SM404MUT-TR, RAV-SM1404BT-E, RAV-SM1104BT-E 102

No.	Part name		Procedure	Remarks
… Drain pan		1.	Take down the main unit and then treat	Screws
			the drain pan on the floor.
				(Fixing lower plate and main unit)
		2.	Remove the both side panels and suction
			grilles.
		3.	(SM802, SM1102, SM1402CT-E only)
			Remove the set screw (1 position) to
			fixing and reinforcing bar.
			(Slide the reinforcing bar toward arrow
			side on the right figure.)	5	-4
		4.	Remove the set screws (9 positions) of
			fixing lower plate.	Heat insulation
		5.	Remove the heat insulation on the drain	The screw that fixed drain pan and
			pan.	main unit is under this insulation.
			(SM562, SM802 : 1 position, SM1102,
			SM1402 : 2 positions)
		6.	Remove the set screws
			(SM562, SM802 : 1 position, SM1102,
			SM1402 : 2 positions) of fixing drain pan
			and main unit.
		7.	Remove the drain pan.	5	-5
			Pull it lower side.
				5	-6
† Vertical grille		1.	Remove the drain pan.	Vertical grille
		2.	Remove the set screws (2 positions) of
			fixing vertical grille.
		3.	Remove the vertical grille.

Screws

(Fixing drain pan and vertical grille) 6 -2

‡ Louver motor,	1.	Remove the side cover (right side only).
Lover drive	2.	Remove the set screws (2 positions) and	Screws
member			(Fixing louver drive member and main unit)
		louver motor.
	3.	Remove the set screws (2 positions) and
		louver drive member.
			Louver drive
			member
			Louver
			motor
			7 -3
			Screws
			(Fixing louver motor and louver drive member)

– 102 –