HOW TO UNLOAD BATTERIES
HOW TO UNLOAD BATTERIES
1 Pull the battery box to remove from the unit.
( See page 8 “HOW TO LOAD BATTERIES”.)
2 Push up each battery by lifting up its positive + end side with your
fingertip.
* Use caution when removing batteries that are held in place by the springs in the battery box. Failure to do so may cause injury to your fingernail.
3 Re-attach the battery box to the unit.
( See page 8 “HOW TO LOAD BATTERIES”.)
Replacing the batteries
•Replace the batteries with two new “AAA” alkaline batteries when appears on the display, or when nothing appears on the display when the POWER
switch is pressed.
•Be sure to replace both batteries with new ones.
•Use the commercial alkaline dry cells. Do not use rechargeable batteries.
•Batteries included are for demonstration purposes only. Battery life may be shorter than specified.
•Dispose of used batteries properly in accordance with local regulations.
English
- Eng 9 -