Citizen CH-671F instruction manual Set the Hour, Set the Minute

Page 12

HOW TO SET THE CLOCK

5 Set the “Hour”.

Press

to set the current hour.

•The clock displays the time in 12 hour format using AM/PM.

Press .

This will finalize the “Hour” setting. The digits

representing the “Minute” on the time display

section will flash.

6 Set the “Minute”.

Press

to set the current minute.

Press .

This will complete the clock setting procedure. The

device automatically turns off power.

•The “Second” will be set to 00 at the moment

when is pressed.

If is pressed during the correcting procedure for each item, the unit will automatically turn off the power. However, the corrected data are saved in this step.

- Eng 12 -

Image 12

Contents REF CH-671F General Remarks For proper measure of blood pressureRemarks Precaution for USE and Maintenance Recaution for maintenance Weee Mark Identification of Parts Universal DesignHOW to Load Batteries Pull the battery box to remove from the unit Re-attach the battery box to the unitHOW to SET the Clock Set the YearSet the Month Set the DateSet the Hour Set the MinutePoints for Accurate Measurement HOW to Wrap the Wrist Cuff Loosely fit the wrist cuff by Pulling the end of the cuffHOW to Wrap the Wrist Cuff Wrap the wrist cuff around your left wrist Make sure that your posture is correctHOW to Measure Your Blood Pressure Press To turn off power Automatic Power Off FunctionIf YOU do not Wish to Store Measurement Results HOW to Call UP Data Stored in Memory HOW to Call UP Previous Measurement Results HOW to Call UP Monthly Average Data HOW to Call UP Previous Monthly Average Data HOW to Delete ALL Data in Memory About Blood Pressure Questions and Answers on Blood Pressure Error Indications Display Mark CONDITION/CAUSE Corrective ActionSpecifications LCDApprox min Before Asking for REPAIR/INSPECTION Mail sales-oe@systems.citizen.co.jp