BEFORE ASKING FOR REPAIR/INSPECTION
Be sure to check the following before sending your blood pressure
monitor for repair/inspection.
Phenomenon | Point to be checked | How to repair |
Display gives no | Check whether batteries | Replace all batteries with new |
indication even | are dead. | ones. |
when you press | Check whether batteries | Load the batteries with correct |
Power switch. | are installed with incorrect | polarity. |
| polarity ( + – ). |
|
No measurement is | Check if the mark has come | Wrap the wrist cuff properly. |
possible. | on. |
|
Check if the wrist cuff is |
| |
|
| |
| wrapped properly. |
|
| Did you stay calm during | Measure again, making sure to |
| measurement? | remain still. |
Note that measurement of blood pressure may not be possible for someone with an extremely weak pulse or cardiac arrhythmia (irregular pulses).
If your blood pressure readings are abnormally higher or lower than those taken in hospital:
If your blood pressure readings are abnormally high or low:
See page 26.
See pages 13 and 16.
- Eng 30 -