Battery Charging
1 |
12 Volt Battery |
with Strap |
Footboard |
Press |
Release |
Button |
•While pressing the release button on the scooter floor, lift the footboard from the scooter.
•Grasp the battery strap and lift to remove the 12 volt battery from the battery compartment.
2 |
|
Battery | 2 |
1
Charger
Connector
• | Plug the charger connector into the battery 1 . |
• | Plug the charger into a standard 120 volt wall outlet 2 . |
Note: If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”.
•Before
•Recharge the battery for at least 14 hours after each use of your vehicle. Do not charge the battery longer than 30 hours.
•Once the battery is charged, pull firmly on the charger connector to disconnect it from the battery. Unplug the charger from the wall outlet. The battery is now ready to be installed in your scooter. Please see the Battery Installation section on page 13 for detailed instructions on installing your battery.
7